Reference: 484557
Ignition nut on crankshaft CGN original type for MINARELLI AM6 engine
Essential spare part in case of loss, wear ... of your old nut!
Banner
Here is a very good crankshaft from TEKNIX at low prices for 50cc motorcycle equipped with the minarelli am6 engine! Of much higher quality than other low-end models, this vilo throne in first place for entry-level racing crankshafts.
It has a very careful balancing with plugs, full masses, the lubrication is reviewed and corrected. The rod is a reinforced model, it rests on a crank pin and a specific cage with anti friction copper shims!
The cage is a treated silver model, size Ø12X15X16.5mm. The finish is excellent, this crankshaft will allow an increase in performance and a reinforcement of the low engine. It will be able to easily accompany the 50 and 80cc engines.
Mounts on 50cc motorcycles with gearbox equipped with the minarelli am3, am4, am5, am6 euro 1, am6 euro 2 :
APRILIA RS 50cc am6 engine from 1997 to 2006 (attention news after 2006 in derbi euro 3 engine)
APRILIA RX am6 engine (attention news after 2006 in derbi euro 3 engine)
APRILIA MX am6 engine (attention news after 2006 in derbi euro 3 engine)
APRILIA TUONO 50cc am6 engine from 1997 to 2006 (attention news after 2006 in derbi euro 3 engine)
BETA RR
BETA RR ALU
BETA CRE
HONDA HM
HONDA CRE
HONDA BAJA
HUSQUVARNA WXE
HUSQUVARNA CH
HM DERAPAGE
HM CRE
MALAGUTI DRAKON
MALAGUTI XTM
MALAGUTI XSM
FANTIC CABALLERO
PEUGEOT XP6
PEUGEOT XPS
MOTORHISPANIA RYZ
PEUGEOT XPS
PEUGEOT XP STREET
PEUGEOT XP STREET EVO
PEUGEOT XR6
MOTORHISPANIA RX
PEUGEOT XR7
MOTORHISPANIA RX-R
RIAJU RS1
RIEJU RS2
RIEJU RS2 MATRIX
RIEJU RS2 MATRIX PRO
RIEJU SMX
RIEJU MRX
RIEJU SPIKE
KEEWAY TX FR
YAMAHA DT
MBK X-LIMIT
YAMAHA TZR
MBK X-POWER
SHERCO SM
SHERCO ENDURO
SHERCO HRD
SHERCO ENDURO
CPI SM
And many other machines!
Reference: 484557
Essential spare part in case of loss, wear ... of your old nut!
Reference: 53401.14
From the top of the range race origin 39.00mm for mécaboite engine Minarelli AM6!
Reference: 090935A
A crankshaft, solid, reinforced and of very good quality for a small price.
Reference: 31134950
A good reinforced crankshaft that mounts to virtually any configuration for an unbeatable price.
Reference: CB.44.91
A crankshaft of high quality with a casting rod, delivered with its bearings celeron big litter !!!
Reference: CB.44.91R
The ULTIMATE vilo for am6, gorsses worn 20mm, celerons bearings, forged rod machined mass, excellent balancing, .... The best of the best !!!
Reference: VI01
A very well balanced reinforced crankshaft that will support the largest configuration on the market.
Reference: CIG-42
A reinforced version, full masses for minarelli am6 with bearings Ø20mm big litter.
Reference: CIG-29
A reinforced version in solid masses for minarelli am6 with normal size bearings!
Reference: 419
A very good quality mid-range crankshaft designed to go up to 14,000 rpm!
Reference: CIG-22
A reinforced crankshaft sport for minarelli am6!
Reference: CIG-78R
A reinforced crankshaft for a low engine sound, ideal to accompany a prepared configuration!
Reference: 367223
One of the best quality, price and performance ratios on the market.
Reference: CB.44.8
A horse race between normal and long, wedge assembly without machining or on your small gain am6 and engine capacity (+ 1mm travel).
Reference: CIG-133R
A reinforced crankshaft for a low solid engine, ideal to accompany a prepared configuration! Stroke slightly increased to 40.7mm!
Reference: 80038
An excellent crankshaft, made in Italy, finishing and impeccable balancing!
Reference: 6030003
High quality crankshaft at low price for am6 engine.