Reference: 2523
Carburettor DELLORTO PHBG 18 flexible BS, without separate greasing, lever choke
The real DELLORTO PHBG in 18mm!
Banner
If you want to preserve low consumption while having more performance than with a SHA or other model for endurance or the road for example, the PHBG model will be a very good compromise.
This low-cost carburetor is of very high quality and has a multitude of adjustments: richness screw, idle jet, needle valve ... This model is the AS (also exists in BD, AD, DS, DD, black model edition, or BS), it is rigidly mounted with a lever, you can also switch it to a cable starter without difficulty.
Compared to the SHA carburetor, this model is much more precise, efficient in recovery, acceleration and peak speed. This model does not have separate lubrication.
Advice : accompany it with a 19 or 20mm pipe, carbon valve slats, pipe as much as possible aligned with the valves, you can simply use an original air filter but also a horn. Provide a range of nozzles from 86 to 100 depending on the filter used.
The carburetor is delivered as such :
Main jet small standard pitch: 85
Needle W07
40 ° cutting bushel
Needle well AU 262
Idle jet 50
Choke jet 60
Float in 4 grams
These accessories can be changed for better tuning, although these carburetors are very well preset. All spare parts and adjustments can be found here.
Summary :
Phbg AS model
Size 19mm
Pipe mounting diameter: Ø24mm
Assembly: rigid
Starter: lever (can also be done with cable)
Fixing diameter for air filter: 32mm threaded (we can also put tulips of different sizes)
Reference: 2523
The real DELLORTO PHBG in 18mm!
Reference: 201.1903
The best 19mm carburetor from POLINI and we can say about the whole market! An evolution version CP for maximum performance!
Reference: 2522
The BS version on 19mm PHBG, flexible, lever choke! High quality certified!
Reference: 2568
The AS version of the DELLORTO PHBG Ø19,5mm. Excellent quality, with large diameter intake tulip, rigid, choke lever, without possibility of depression or separate greasing!
Reference: 517454
Replacement carburettor TUN'R 'R type PHBG DS for your motorcycle, scooter ...
Reference: 201.1902
A very good high quality carburetor at low price, with separate lubrication and vacuum plugs! Choice of cable or lever choke!
Reference: 02631
The DS version of the 19mm DELLORTO VERITABLE PHBG. This flexible version has a cable choke, a separate lubrication possibility, without vacuum outlet.
Reference: 467793
A carburetor much better than a TNT but less well finished than a DELLORTO, but it will still provide a good filling of your engine for a relatively low price.
Reference: 134071
Cheap and quality carburettor because it is between the TNT and the DELLORTO .
Reference: 2575
An excellent version of the real PHBG RIGIDE DELLORTO 19mm, this CS has a large intake tulip, a lever choke and a possibility of separate lubrication!
Reference: 2587
The AD version of the PHBG DELLORTO, rigid, choke lever and without separate lubrication or depression.
Reference: 2911
The ultimate and ultra racing version of the 19 PHBG, of much better quality with parameters revised upwards, Red Edition model!
Reference: 467791
Cheap and quality carburettor because it is located between TNT and DELLORTO.
Reference: 473460
A good quality carburetor for its price which will fuel your engine well but which will not have as good a finish as a DELLORTO.
Reference: 2513
The AD version of the PHBG DELLORTO, rigid, lever choke and without separate greasing.
Reference: 201.1901
A very good high quality carburetor at a low price, with separate greasing and vacuum plugs! Choice of cable or lever choke!