Reference: 324479
Set of 3 DOPPLER plastic guides for S1R and ER1 drives
Set of 3 sliders for all DOPPLER drives with roller S1R and ER1.
Banner
Here is the limiting flange or spacer for MALOSSI Multivar variator. Of good quality, this element will be useful during the homologation of the variation part of your 2 wheels. For Ø20mm variator barrel, 3mm thick and 7mm wide. Its installation will prevent the variator from opening and therefore restrict the launch of the motor at about 45 km / h.
Reference: 324479
Set of 3 sliders for all DOPPLER drives with roller S1R and ER1.
Reference: 4133
Quality seal essential to avoid any engine problems.
Reference: 090400
Essential part for the proper functioning of your starting mechanism on foot, kick.
Reference: 242.029
POLINI quality, indispensable parts for the smooth running of your drive.
Reference: 482371
M10 nut replacement, standard quality original!
Reference: 483686
Set of 3 sliders for all roller drives
Reference: 935.054
Ideal in case of wear of your old gun for a refurbishment at a lower cost.
Reference: 462203
Game 3 sliders for all drives and S2BR DOPPLER S3R a roller!
Reference: 170311
Ideal in case of loss or wear of your old nut.
Reference: 9915480
A good quality product cheaper than the original. Ideal for refurbishing your scooter.
Reference: 9915530
A spacer reinforced by TOP performance which is mounted on the origin at a lower cost.
Reference: 9915460
Indispensable for maintaining your drive or flywheel! Original TOP PERFORMANCES quality part.
Reference: 440173
3 supports delivered complete with screws, pins and pins / clips!
Reference: 9915540
Essential part for the operation of your controller.
Reference: 489829
Ideal to repair his drive on his scooter BOOSTER / BW'S / NITRO / AEROX / SR50 / F12
Reference: 293040
Identical to the original but cheaper.