Reference: 517937
Set of 4 reinforced / elongated CGN cylinder head nuts m7 thread Peugeot 103 / MBK 51 / AM6 / DERBI …
Very long and reinforced, these nuts allow you to tighten with more precision and support a higher tightening torque!
Banner
Set of 4 elongated competition cylinder head nuts. These nuts allow you to come out of the fins on the air cylinder head and to be able to tighten them with a flat torque wrench so in the absence of any friction which allows you a perfect tightening. You will have to use them with 4 washers recess.
Length 35mm
Original type thread therefore M7 Peugeot 103 and MBK 51 / motobecane (av10) av7 ...
Weight of the 4 nuts: 72 grams
Maximum thread size that can enter the nut: 30mm
They are widely used in competition on air or even liquid cylinder heads. Some have already spoken of virtues in cooling but they do not improve cooling in any way.
Reference: 517937
Very long and reinforced, these nuts allow you to tighten with more precision and support a higher tightening torque!
Reference: S.1447 - 001447 (PIAGGIO)
Ideal in case of breakage, loss or worn thread of your old nut.
Reference: 12400912
A wedge required for the passage of large crankshafts and high engine FACTORY from BIDALOT!
Reference: 28458
Nut true unity origin Peugeot for many applications.
Reference: 156263
Set of 4 M7 nuts with their 4 washers.
Reference: 467408
Studs reinforced, treated and much cheaper than the real origin.
Reference: JAC-07
The shim needed for crankshaft race long 42 / 43mm on minarelli horizontal!
Reference: 317.0005
Set of 2 M6 studs that can be used for many applications.
Reference: 0716344
The shim necessary for crankshafts 85mm long connecting rod on horizontal minarelli!
Reference: JAC-09
The shim necessary for crankshafts 85mm long connecting rod on horizontal minarelli!
Reference: 19 9419Q
Ideal for replacing your old bolts MALOSSI MHR.
Reference: 87171100
Ideal in case of breakage, loss or worn thread of your old nut.
Reference: 12512972
Reinforced and treated high-end stud for high engine BIDALOT Racing FACTORY.
Reference: 87307000
Ideal in case of breakage, loss or worn thread of your old nut.
Reference: JAC-08
The shim needed to run long crankshafts 43/44 / 45mm on minarelli horizontal!
Reference: 315.0023
POLINI bleed plug for 1/8 cylinder head with copper gasket