Reference: 848
Plate, TRANSVAL bare plastic pulley without pinion for Peugeot 103 SP, MV, MVL, LM, VOGUE ...
A good quality (bare) tray for a low price.
Banner
This DOPPLER pulley from the OPEN range consists of a plate entirely cut in the mass in a very high quality aluminum. Its silver anodized finish allows it to fight against oxidation.
The steel pinion, which is anti-corrosion treated, acts as a centering device in the chainring and is adjusted to reduce skipping phenomena.
The 5 screws make it possible not to have any shearing thanks to their countersunk heads which, of course, are conducive to fighting against loosening.
Composition :
- 1 Ø213mm aluminum plate, for belt with original width.
- 1 steel pinion (10 or 11 teeth)
- 2 sealed needle bearings HK1616-2RS.
- 5 FHC M5 x 15 screws.
Don't forget to select the number of teeth before adding to the basket!!
Assembly advice:
The countersunk head screws are to be tightened crosswise, to a torque of 4.5Nm.
Grease the needle roller bearings before fitting, then every 4500 kilometers if necessary, or every year.
Mounts on:
PEUGEOT 103 MVL (50cc)
PEUGEOT 103 SP (50cc)
PEUGEOT 103 VOGUE (50cc)
Reference: 848
A good quality (bare) tray for a low price.
Reference: 510120
A piece that will give you a beautiful sporty and efficient TUNING aspect.
Reference: S715386
Ideal for winding without a game with a lower-cost quality product.
Reference: 511877
Excellent for not having play in your pulley / chainring. Attention limited quantity!
Reference: 3005
A superb lightweight and aesthetic pulley with 11 tooth pinion for your 51, in machined aluminum.
Reference: 367902
A very good quality pulley for the DOPPLER or GIRAUDO clutch pulley of your PEUGEOT 103 (except SPX / RCX) and MBK 51... Available in 10 or 11 teeth!
Reference: 8806
Ideal for a refurbishment of your machine.
Reference: 4278
Ideal in case of breakage or wear for a change of good quality at low prices.
Reference: 491174
Clutch pulley ER86 with adjustable clutch without disassembly!
Reference: 508550
Ideal for starting fresh, mounts on ER86 DOPPLER pulley all models also on the original SPX / RC X / CLIP / MVX clutch pulleys.
Reference: 722706
The original clutch bell of your 103 SPX and RC X.
Reference: 491173
Clutch pulley ER86 with adjustable clutch without disassembly!
Reference: 702
The original spare pulley shaft in 24 teeth for PEUGEOT 103 mopeds.
Reference: 288776
A pulley which will bring a very good improvement compared to the origin.
Reference: 739174
A high-end piece by PEUGEOT nothing to do with the other pieces original type.
Reference: 850
A quality product at a low price. for 103 SP, MV, MVL, VOGUE ...