Reference: 02838_00
Needle for carburettor DELLORTO PHBG, PHBG Racing, SHA
Ideal in case of problem, breakage or loss of your old part!
Banner
Reference: 02838_00
Ideal in case of problem, breakage or loss of your old part!
Reference: 53002_00 / 53002_78
A pack to switch your PHBG carburettors choke lever to cable choke!
Reference: 09812
A mass-machined brass cap for your carburetors with aluminum tank or racing black edition!
Reference: 09814_00
A tulip which increases the venturi effect and therefore the efficiency of your engine. In addition to this, you need to know more about it.
Reference: 10 5397B
Ideal in case of wear, breakage ... of your old MALOSSI tank cap.
Reference: 14958_00
Ideal in case of loss or breakage of your old support, bushel socket.
Reference: 53027_00
The idle screw with its spring for your PHBG carburettors!
Reference: 09811_00
The aluminum racing tank, mounts on all PHBG carburettors, to remove your jets faster, drain faster and get more strength!
Reference: 18951-53
The replacement cover for your DELLORTO PHBG carburettors, to screw.
Reference: 53129_00
Ideal in case of loss or to pass your cable as desired.
Reference: 53031.78
The spare cover with screws for your DELLORTO PHBG carburettors except Racing Red and Black Edition.
Reference: 16962_00
The replacement cover single screw for your carburettors DELLORTO PHBG Racing Red and Black Edition.
Reference: 213458
A necessary part for the proper functioning of your carburetor.
Reference: 1282
Ideal for lost or just for a refurbishment without spending too much.
Reference: 01104_00
Arises directly in the plug cover, also available in angled with adjuster.
Reference: 52526_77
Ideal for refurbishing your standard PHBG or racing black edition.