Reference: 01131246
Kit 70cc Ø46mm (10mm axis) aluminum AIRSAL minarelli vertical (booster rocket, bw's,…)
A very good 70cc for a maximum of high speed and torque.
Banner
Piece unapproved! Only reserved for the competition, with closed circuits and tracks.
The G-Force kit PINASCO is the sport model, less efficient but more strong and torquey as racing mono fascia release. This kit is a kit already very efficient, its diameter 47mm offer a capacity of almost 70cc, the diagrams are based fairly high speeds, we could compare these cylinders with aluminum ATHENA, the resemblance is truly present.
The cylinder is a model reviewed and corrected level base, diagrams, it is treated aluminum nickel-silicon (nykasil), high quality and really damaged the finish is perfect, it's even shot at joints plans! Aurrons We also noticed a well worked admission. To slow the race, foster couple and solidity, PINASCO opted for a dual piston segment high-quality high silicon content. The cylinder head is a model high compression, it is turned, the chamber is tapered, polished and designed specifically for the kit, it is also increased in order to promote cooling.
This kit comes with strips of carbon valves racing to get the right diet (good resonant frequency) with this kit, it also increases reliability. This kit also comes with enhanced racing needle cage. We highly appreciated that the kit has passed cylinder head O-ring mounts unlike dubious origin with aluminum seal. In short this kit serras an excellent power / strength / price, it is also very complete, very significant was a time when the kits 70cc aluminum bi segment are very rare. If you ever have in your mind a higher engine speed kit, you can simply enter the racing version by asking a racing piston mono segment, that of the single-fascia G-Force settles above.
We advise to accompany this kit with at least: exhaust racing (the PINASCO is very suitable), reinforced crankshaft, reinforced bearings, carburation 19mm, cold candle racing, ignition unlock.
The pack contains:
Aluminum cylinder d.47mm
Bi piston segment d.47 axis 10
2 segments including one chrome (for the top of the piston)
Pack complete joint reinforced
Sticker
notice
Piston clips to 10mm crab axis
Axis strengthened Ø10mm
High compression truncated polished cylinder head
Lamella carbon valve 0.35mm
Reinforced needle cage
Spare parts:
Piston shaft Ø10mm
Piston shaft Ø12mm
Ø47mm segments
Complete seal pack
Cylinder head
Needle cage
Cylinder / piston without cylinder head
axis Ø10mm
axis Ø12mm
Ø10mm clips
Ø12mm clips
Optional we offer a preparation course 1, this preparation is a modification of the channels and the exhaust port by increasing the charts and improvement of the duct, it increases the cylinder performance. Improved piston and bottom skirt is also included in the amendment. Allow a little extra time for this preparation!
Itself on:
APRILIA AMICO
Aprilia SR (before 1993 only)
FANTIC BIG WHEEL
CARELLI PONY
GARELLI SR
ITALJET BAZOOKA
ITALJET PISTA
ITALJET REPORTER
ITALJET SCOOP
ITALJET YANKEE
ITALJET ASCOT
ITALJET ASTRA
LEM FLASH
LEM GHIBLI
LEM TORNADO
LEM TORNADO SS1
KOTIR SR
KTM CHRONO
MBK BOOSTER
MBK BOOSTER NAKED
MBK BOOSTER ROCKET
MBK BOOSTER NEXT GENERATION (NG)
MBK BOOSTER CW
MBK BOOSTER SPIRIT
MBK STUNT
MBK TARGET
MBK BOOSTER TRACK
YAMAHA BW'S
YAMAHA BW's NG
YAMAHA BW'S ORIGINAL
YAMAHA BW'S NAKED
YAMAHA CRZ
YAMAHA CT
YAMAHA SLIDER
YAMAHA SPY
YAMAHA ZUMA
And other models ...
Reference: 01131246
A very good 70cc for a maximum of high speed and torque.
Reference: 166.0074/R
The famous POLINI RACING CORSA kit! Super efficient and super robust!
Reference: 166.0054
A small 70cc cast iron kit made for the original cylinder head! High quality, low price!
Reference: 10041403
Reference: 31 7559
For more performance and a solid engine! This kit 70cc will be very good to equip your scooter with low engine Minarelli / Yamaha Vertical Air.
Reference: 76710.00
A high reliable, solid and powerful engine for your vertical minarelli motor scooter. Version axis diameter 12mm, model GP1.
Reference: 76595.00
High high performance engine, huge 50mm diameter, huge bar exhaust, high compression ratio ... Very heavy!
Reference: 9909620
A high 70cc engine Ø47mm solid and above all powerful.
Reference: 166.0074
Very torquey and solid kit in 70cc for booster.
Reference: EQ-703
A 70cc cast, the powerful BARKIT home for your boosters and other scooters équippés a vertical minarelli!
Reference: 76840.00
A reliable, solid and efficient high engine for your vertical minarelli motor scooter. Available in 10 or 12mm axle choices. RACING version.
Reference: 76506.00
A high reliable, solid and efficient cast iron engine for your vertical minarelli motor scooter. Available in 10 or 12mm axle to choose from SPORT version.
Reference: P400485100089
A high performance 70cc engine kit, racing version with a choice of 10 or 12mm axle.
Reference: 9931370
A kit 70cc cast 100% complete, powerful and reliable for engine MINARELLI & YAMAHA Vertical air cooling.
Reference: H01138647
A much stronger kit than the AIRSAL in aluminum and very torquey. A perfect kit to ride all day and long distance without fear of a heater or primer.
Reference: 31 7237
An excellent torque / power ratio, top strength for your MBK BOOSTER, SPIRIT, STUNT, YAMAHA BW'S, SLIDER...