Reference: S4C05000006A
ATHENA Racing graphite piston Ø50mm for kit 80cc ATHENA on mécaboite driving DERBI euro 3 & 4
Replacement piston available in two wear sizes for the maintenance of your 80cc Ø50mm kit.
Banner
In preview, it is available from us! Here is the 80cc Ø50mm kit for DERBI EURO 3 and 4 engine (mécaboites DERBI, APRILIA after 2006, GILERA….). This cylinder is very efficient, of high quality and at a very affordable price. Another very good top engine from the Italian firm. The diameter of 50mm offers real 78.53cc in the company of the 40mm stroke of the original crankshaft of the DERBI engine.
The cylinder is a 5-transfer transfer, the exhaust is a large model with boosters, it is made of aluminum with a very high-end treatment, the diagrams are very based on high speed and quite high! With a 1mm squish (recommended by Athena) you will get a compression ratio of 16: 1. The cylinder head is a decomposable model (in 2 part). The high compression chamber has a frustoconical shape and a polished finish. In order to prevent the breech block from turning, the island is caught on the studs.
You will have to accompany this powerful kit with a good crankshaft, racing exhaust, well-released ignition, large carburetion ... We are already sure that this cylinder will be all the rage, especially on the euro 3 and 4 engine from DERBI where there is no not a lot of choice! The kit is obviously supplied with 4 base gaskets (2 aluminum, a paper and 1 transparent) to make your squish! It is also delivered with the complete instructions.
The piston is a very high-end graphite model mounted mono to slow down the revs, the segment is a hard chrome domed model pre-run in very fine high-end steel for less friction. Another advantage, the kit is delivered with the valve seal (very often during assembly we retouch the intake) ... For the cylinder head gasket, for reasons of solidity, ATHENA preferred to remain on an aluminum plated gasket (also widely used on large displacement 2 stroke els).
We recommend this kit with : crankshaft and reinforced bearings (set C4), RACING muffler, large carburetion (24mm to 28mm round bushel for the best with this type of exhaust), racing slat valves 0.30 to 0.40mm depending on the diameter ... Cold candle, ignition well released ...
The pack contains :
Cylinder head stud
Cylinder head cover
Segment
Piston clips
Piston pin
Piston
Complete seal pack
Bleed screw
Cylinder
...
Spare parts :
Segment
Axle + piston clips
As an option we offer a stage 1 preparation, this preparation is a modification of the channels and the exhaust port by increasing the diagrams and improving the duct, it increases the performance of the cylinder. An improvement to the piston and the bottom of the skirt is also included in this modification. Allow a little extra time for this preparation!
Reference: S4C05000006A
Replacement piston available in two wear sizes for the maintenance of your 80cc Ø50mm kit.
Reference: P400105160004
Indispensable for the refurbishment of your 80cc kit on mécaboite driving DERBI euro 3 and 4
Reference: S410105308005
Ideal replacement in case of breakage or advanced wear of your old part.
Reference: S410105308008
Replacement cylinder head stud for ATHENA Racing 80cc kit.
Reference: S41316186
Bulge replacement segment, quality for kit 80cc BARIKIT minarelli am6 & derbi.
Reference: 01084350
A kit with great performance and good strength and all this at a reduced price.
Reference: 3112985
The famous MHR REPLICA 80cc bi-segment for DERBI, standard race, extraordinarily torquey and solid !! One of the best in normal racing on the market!
Reference: EQ-1031-S
The racing version of the 80cc Ø50mm BARIKIT BRK. Mono-segment.
Reference: EQ-990-S
The racing version of the 80cc Ø50mm BARIKIT. Mono-segment with stud cylinder head.
Reference: 3113564
The famous MHR REPLICA TEAM 80cc for derbi, standard race and original size transfers of course ... But what power! What a couple and what solidity !! One of the best normal races on the market!
Reference: 23170.00
A huge cylinder! At the height of TEAM MHR. Exhaust boosters, large diameter 50mm, single segment, aluminum ...
Reference: 3113221
The famous MHR REPLICA 80cc for derbi, standard race and original size transfers of course ... But what power! What a couple and what solidity !! One of the best normal races on the market!
Reference: 11000887
One of the most efficient high engine kit for DERBI Euro 3 and 4 !!! Ø50.5mm, in stroke 44.9mm therefore like the origin! A real couple monster.
Reference: EQ-976-S
The racing version of the 75cc Ø48mm BARIKIT. Mono-segment with stud cylinder head.
Reference: EQ-780
The famous large diameter in cast iron from BARIKIT for DERBI Euro 3 and 4 motorbikes. An excellent quality / price ratio with stud cylinder head, 5 transfers, booster exhaust ....
Reference: EQ-957-S
The racing version of the 80cc Ø50mm BARIKIT. Bi-segments with stud cylinder head.
Reference: G-990-R
The 50mm 80cc cylinder head version prepared by BARIKIT professionals. Even more powerful than the other 80cc BARIKIT!
Reference: 01084248
A low-cost kit that does not neglect quality!
Reference: 11000088
A reliable and efficient 70cc kit for derbi Euro 3 and 4!
Reference: 109.0016
One of the rare competitors to match the TEAM MHR, this POLINI EVOLUTION offers a lot of torque and power, to be accompanied by a good configuration!
Reference: 3112988
The famous MHR TEAM 80cc for Derbi Euro 3 and 4, standard race and original size transfers of course ... But what power! What a couple and what solidity !! One of the best normal races on the market!