Reference: 04072540
Ø40mm cylinder head for kit 50cc AIRSAL AIRSAL luxury aluminum on minarelli horizontal liquid (nitro, aerox ...)
High compression cylinder head replacement for kit 50cc Ø40mm AIRSAL luxury aluminum.
Banner
Approved, respecting the 50cc displacement.
Here the small kit high 50cc AIRSAL luxury version for scooter MINARELLI Horizontal engine liquid such as MBK Nitro, Yamaha Aerox .... Brand reputation and well-known in the community, one of the best quality / price. This model 40mm diameter will offer slight performance increase compared to the original while maintaining optimum strength.
While it will be more efficient because it has a very correct finish, architecture and work in the channels reviewed and corrected but is primarily an exhaust with bar ... A very good feature to start on a good foundation.
The aluminum cylinder nikasil upscale with its 5 transfers and exhaust with bar. It is accompanied by a yoke also machined aluminum with the best materials, it has a room for incoming better alignment cylinder / cylinder head high compression hemispherical chamber model, polished finish.
Therefore equipped with a high piston mono segment-end and side nipples with 1mm thickness steel end segment to allow more high modes (reduction of frictions), with 2 clips in G and its axis of Ø10mm piston diameter x 33mm length . Its assets? His treatment nikasil aluminum high-end finish and an attractive price! Comes complete with head, pack gaskets, piston, cylinder, exhaust bolts and cylinder head screws ...
We recommend to accompany this cylinder: a carburizing 17,5mm, good setting and a good carburetor adjustment variation, racing cold candle, licensed sports exhaust, a racing oil 2 times 100% synthetic ...
contains:
40mm master cylinder aluminum 5 transfers exhaust with bar.
-Culasse Aluminum incoming high compression chamber.
-piston Mono segment with side grease.
-Segments For steel 1mm thick.
-Clips Piston in G.
Axis-piston Ø10mm X 33mm.
-pack High engine seals.
-Stud Threaded exhaust.
Yoke -Visserie
-Notice ...
Itself on:
Engine 2 Time minarelli horizontal liquid scooter
2 motor scooter minarelli horizontal air Time Spent liquid (long only)
APRILIA AREA 51 LC
APRILIA GULLIVER 50
Aprilia SR 50 LC NETSCAPER
APRILIA RALLY 50 LC
RACING APRILIA SR 50 LC
APRILIA SONIC LC
APRILIA SR REPLICA LC
APRILIA SR STEALTH
BENELLI 491 SPORT LC
BENELLI K2 50 LC
BETA ARK 50 LC
BETA EIKON 50 LC
GSP GARELLI 50 LC
ITALJET DREAGSTER 50 LC
MALAGUTI F15 FIREFOX 50 LC
MALAGUTI F12 DIGIT KAT LC
MALAGUTI F12 LC Phatom
MALAGUTI F12 R LC
MBK MACH G 50 LC
MBK NITRO 50 LC
YAMAHA AEROX 50 LC
YAMAHA JogRR 50 LC
And many other models ...
Optional we offer a preparation course 1, this preparation is a modification of the exhaust port by increasing the charts and improvement of the duct, it increases the cylinder performance. Improved bottom skirt is also included in the amendment. Allow a little extra time for this preparation!
Reference: 04072540
High compression cylinder head replacement for kit 50cc Ø40mm AIRSAL luxury aluminum.
Reference: 06072540
Piston mono segment good for kit 50cc Ø40mm AIRSAL luxury aluminum.
Reference: 11072540
Ideal for refurbishment of your cylinder.
Reference: 14072540
Pack joint replacement good. Make sure you change your joints at each winding to a sealed motor with maximum compression.
Reference: 031000F
A little more efficient than the original types such as the TNT ORIGINAL or TEKNIX, this small high engine without cylinder head is ideal for refurbishing its NITRO, AEROX... By having a small power gain!
Reference: 166.0094
The famous 50cc cast iron kit from POLINI, finishing, use of high quality materials and guaranteed performance!
Reference: 01071140
An excellent compromise between torque, power and longevity. With a price defying all competitions.
Reference: 251526
A high engine cylinder head without cheap for your nitro, aerox, jog ... engine minarelli horizontal liquid scooter.
Reference: 129.0598
An original type kit that will allow guests to ride all day without spending astronomical sums in a cylinder. Ideal if primer or tightening your old engine.
Reference: 479128
A high solid motor, ideal for start fresh!
Reference: 032050
A high aluminum engine with exhaust and cylinder head high compression booster with a totally ridiculous price!
Reference: 129.0612
Just below the GT RS10, RS10 the NIKASIL PRO is a high performance aluminum kit with torque / power ratio excellent.
Reference: 030307
A kit has very low prices, strong, ideal to get your nitro, jog, aerox ... Anew!
Reference: 11210
Here is a high quality motor much cheaper than the original and the one from TEKNIX which offers better heat dissipation, but also better expansion, less friction ...
Reference: EQ-723
An original type kit that will allow you to ride every day without spending astronomical sums in a cylinder. Ideal in case of starting or tightening your old engine.
Reference: 3111511
The famous TEAM of MALOSSI MHR in 50cc ... What to say ... Nothing has that it is more to present and that it is a monster of power!
Reference: 483461
The kit kind cheapest origin of the market, ideal for travel every day, small price to appointments.
Reference: 073700
A very powerful kit and very solid! High quality.
Reference: EQ-767
Racing version 10 transfers of BARIKIT FONTE 50cc for horizontal liquid engine!
Reference: 129.0604
A more torquey kit than the original while being as reliable which will allow you to drive every day without spending astronomical sums in a cylinder. Ideal in case of starting or tightening your old engine.