Reference: 050349
Bi-segment TNT piston Ø40,3mm for kit 50cc TNT CAST IRON and origin on minarelli am6
Ideal for maintaining and repairing its 50cc cast iron TNT kit, original cylinder ... The original graphite TNT piston.
Banner
Mounts with the original cylinder head.
Ideal for the refurbishment of your high engine if the cylinder head is not affected, here is the cylinder type TNT origin for mécaboite minarelli am6 engine. Of average quality, it is certainly not the same quality as the origin MINARELLI MOTORI, but it has a very low price and will offer you enough strength to hold 10 000km. Cast iron, it comes complete with piston, segments, joints, axle, clips ...
Optionally we offer a stage 1 preparation, this preparation is a modification of the channels and exhaust light by increasing the diagrams and improving the pipe, it increases the performance of the cylinder. An improvement of the piston and skirt stocking is also included in this modification. Allow a little extra time for this preparation!
This high engine mounts on the following 50cc motorcycles with gearbox equipped with MINARELLI engine AM3, AM4, AM5, AM6 euro 1, AM6 euro 2:
-APRILIA RS AM6 engine from 1997 to 2006 (after 2006, pay attention to the engines passed in DERBI euro 3)
-APRILIA RX AM6 engine (after 2006, pay attention to the engines passed in DERBI euro 3)
-APRILIA MX engine AM6 (after 2006, pay attention to the engines passed in DERBI euro 3)
-BETA CRE
-BETA RR
-BETA RR ALU
-HONDA HM
-HONDA CRE
-HONDA BAJA
-HUSQUVARNA WXE
-HUSQUVARNA CH
-HM DERAPAGE
-HM CRE
-MALAGUTI DRAKON
-MALAGUTI XTM
-MALAGUTI XSM
-FANTIC CABALLERO
-PEUGEOT XP6
-PEUGEOT XPS
-PEUGEOT XP STREET
-PEUGEOT XP STREET EVO
-PEUGEOT XR6
-PEUGEOT XR7
-MOTORHISPANIA RYZ
-MOTORHISPANIA RX-R
-MOTORHISPANIA RX
-RIEJU RS1
-RIEJU RS2
-RIEJU RS2 MATRIX
-RIEJU RS2 MATRIX PRO
-RIEJU SMX
-RIEJU MRX
-RIEJU SPIKE
-KEEWAY TX EN
-YAMAHA DT
-MBK X-LIMIT
-YAMAHA TZR
-MBK X-POWER
-SHERCO SM
-SHERCO ENDURO
-SHERCO HRD
-SHERCO ENDURO
And many other machines!
Reference: 050349
Ideal for maintaining and repairing its 50cc cast iron TNT kit, original cylinder ... The original graphite TNT piston.
Reference: 061411
Ideal to change the segmentation of your kit 50cc TNT cast iron or your high engine of origin am6 euro 2, at low price!
Reference: 011332403
The luxury version of the AIRSAL 50cc in two-segment, a powerful, solid, torquey kit and above all with an attractive price, very good basis for engine preparation.
Reference: 129.0615/GT
Already available at our place, the newest member of FURYTECH! More powerful, more torquey, ...
Reference: 9916770
A high complete engine, solid and efficient. Ideal for moving around every day.
Reference: 53407.00
A cheap kit, reliable and efficient transfers with 7 admisison!
Reference: 133.1011
A very good high engine which brings a very good performance gain while preserving the solidity and the legal displacement of 50cc.
Reference: P400130100002
A powerful and very solid kit, the ATHENA is a great companion to ride every day, a high quality engine based high speed.
Reference: 220399
Here is a high quality good motor much cheaper than the origin which offers better heat dissipation, less friction ...
Reference: 011313403
The AIRSAL 50cc SPORT is ideal for riding every day, a performance gain is made for a great price on your am6 engines.
Reference: 478325
Ideal for refurbishing your high CPI engine.
Reference: KT00098
A high, solid and efficient 50cc engine. High quality and approved for daily circulation.
Reference: 482036
The 50cc kit type origin the cheapest on the market with a quality and a correct finish.
Reference: 3112381
A high-performance kit reserved for competition in 50cc, diagrams very worked with a very studied architecture!
Reference: EQ-922-S
High complete engine ideal for respecting the 50cc displacement and circulating every day with an efficient kit 5 transfers, bar exhaust, high compression cylinder head with incoming stud, mono segment piston ...
Reference: CIL-788
Cylinder / piston without cylinder head ideal for meeting the 50cc engine and circulate daily. 7 transfers, extended oval exhaust, dual piston segments .... To accompany a cylinder head high compression BARIKIT.
Reference: 013006476
The deluxe version of 50cc AIRSAL bi-segment, a powerful kit, strong, torquey and especially with an attractive price, very good engine preparation base.
Reference: 11000168
An excellent 50cc kit, very powerful and very robust, ideal for competition as for the road!