Reference: 206.0370
Set of 2 segments Ø40,3mm for kits 50cc POLINI cast iron on minarelli am6
2 segment POLINI high-end, ideal in case of maintenance of your kit POLINI cast iron.
Banner
Homologated on the road, respects the displacement of 50cc!
Here is a small 50cc RACING kit from the house POLINI MOTORI, this 40.3mm diameter cast iron model will bring you additional performance compared to the original and it will preserve strength, reliability and this for a low price!
It is ideal to start afresh by improving its acceleration and its top speed, POLINI has greatly worked on this high engine, the channels are modified but the transfers to the base remain identical to the origin.
The piston is a reinforced model with two thin segments including a domed chrome for the top of the piston.
The cylinder head is a high-chamber frustoconical model with a polished finish. To further improve the quality, POLINI has to pass its cylinder head in O-ring.
The pack contains:
-Cylinder cast iron Ø40.3mm
-Aluminum cylinder head Ø40.3mm
-Piston reinforced bi-segments Ø40.3mm
-2 thin segments including a domed chrome for the top of the piston
-Muffler flange
-Crab type piston clips
-Reinforced piston pin
-Pack attached
-Notice
As an option we offer you a stage 1 preparation, this preparation is a modification of the channels and the exhaust port by increasing the diagrams and improving the duct, it increases the performance of the cylinder. An improvement to the piston and the bottom of the skirt is also included in this modification. Allow a little extra time for this preparation!
This high engine is mounted on the following 50cc motorcycles with gearboxes equipped with the MINARELLI AM3, AM4, AM5, AM6 euro 1, AM6 euro 2 engine:
-APRILIA RS AM6 engine from 1997 to 2006 (after 2006, beware of engines passed in DERBI euro 3)
-APRILIA RX AM6 engine (after 2006, beware of engines passed in DERBI euro 3)
-APRILIA MX AM6 engine (after 2006, beware of engines passed in DERBI euro 3)
-BETA CRE
-BETA RR
-BETA RR ALU
-HONDA HM
-HONDA CRE
-HONDA BAJA
-HUSQUVARNA WXE
-HUSQUVARNA CH
-HM DERAPAGE
-HM CRE
-MALAGUTI DRAKON
-MALAGUTI XTM
-MALAGUTI XSM
-FANTIC CABALLERO
- PEUGEOT XP6
- PEUGEOT XPS
- PEUGEOT XP STREET
- PEUGEOT XP STREET EVO
- PEUGEOT XR6
- PEUGEOT XR7
-MOTORHISPANIA RYZ
-MOTORHISPANIA RX-R
-MOTORHISPANIA RX
-RIEJU RS1
-RIEJU RS2
-RIEJU RS2 MATRIX
-RIEJU RS2 MATRIX PRO
-RIEJU SMX
-RIEJU MRX
-RIEJU SPIKE
-KEEWAY TX EN
-YAMAHA DT
-MBK X-LIMIT
-YAMAHA TZR
-MBK X-POWER
-SHERCO SM
-SHERCO ENDURO
-SHERCO HRD
And many other machines!
Reference: 206.0370
2 segment POLINI high-end, ideal in case of maintenance of your kit POLINI cast iron.
Reference: 204.0950
The piston POLINI 50cc POLINI cast kit for minarelli AM6.
Reference: 317341
Good quality at a good price, a high engine ideal to maintain an original configuration.
Reference: 53407.00
A cheap kit, reliable and efficient transfers with 7 admisison!
Reference: 011332403
The luxury version of the AIRSAL 50cc in two-segment, a powerful, solid, torquey kit and above all with an attractive price, very good basis for engine preparation.
Reference: 013006476
The deluxe version of 50cc AIRSAL bi-segment, a powerful kit, strong, torquey and especially with an attractive price, very good engine preparation base.
Reference: 482036
The 50cc kit type origin the cheapest on the market with a quality and a correct finish.
Reference: 220399
Here is a high quality good motor much cheaper than the origin which offers better heat dissipation, less friction ...
Reference: 011313403
The AIRSAL 50cc SPORT is ideal for riding every day, a performance gain is made for a great price on your am6 engines.
Reference: 504636
The latest from DOPPLER, the high cast iron engine which brings a very good performance gain while preserving the solidity and the legal displacement of 50cc.
Reference: 034000A
A strong and powerful 50cc high engine. High quality and approved for daily use.
Reference: EQ-922-S
High complete engine ideal for respecting the 50cc displacement and circulating every day with an efficient kit 5 transfers, bar exhaust, high compression cylinder head with incoming stud, mono segment piston ...
Reference: 01300940
A great small kit 50cc aluminum with exhaust with bar, top to increase performance while remaining in the statutory and displacement in an accessible price on your ICC and other types am6!
Reference: P400130100004
A kit that allows you to have torque at all speeds.
Reference: 129.0615/GT
Already available at our place, the newest member of FURYTECH! More powerful, more torquey, ...
Reference: 478325
Ideal for refurbishing your high CPI engine.
Reference: EQ-991-S
High complete engine ideal for respecting the 50cc displacement and circulating every day with a high-performance kit. 5 transfers, bar exhaust, high compression cylinder head with incoming stud, single segment piston ...
Reference: 479130
A kit with diagrams higher than the original with a cylinder head overcompréssée for a considerable performance gain while maintaining a very good strength.