Reference: 4066
CGN intake valve seal for MBK 51 / motobecane av10
Ideal for leak-free winding at a lower cost for a more reliable engine.
Banner
Ideal for mounting carburetors from 17 to 19mm in rigid or flexible PHBG with special rigid pipe sleeve, here is the CGN pipe for MBK 51 angled. It has an internal diameter of 18mm, and a diameter of 24mm at the fixing level.
The finish is not top, but it is going very well, it will be a very good basis for engine preparations. Aesthetic level it is also nice.
Please note the packaging may vary depending on arrival. Sometimes it can be written CGN and other TEKNIX.
Reference: 4066
Ideal for leak-free winding at a lower cost for a more reliable engine.
Reference: 1408
At a good price and ideal to accompany a 14 to 16mm SHA carburetor on your MBK 51.
Reference: 8542
Pipe for 15 or 16mm SHA carburetor.
Reference: 215.0242
Top model ideal for mounting a carburetor SHA 15 or 16mm on your MBK 51.
Reference: 1411
At a good price and ideal to accompany a 17.5 to 20 mm PHBG carburetor on your MBK 51.
Reference: 365952
A perfect pipe for mounting a carburetor in flexible mounting with a diameter of 17 to 21mm. It is very short and very well ventilated to have a good gain in power.
Reference: 02 6090B
A pipe of very good quality as usual at MALOSSI. This pipe is micro-blasted to prevent gas rebounds. It will agree very well with a 15mm carburetor.
Reference: 516868
A perfect pipe to mount a carburettor in flexible assembly with a diameter of 17 to 21mm. It is very short and very well venturized to have a good power gain.
Reference: 1415
A pipe with a correct finish that will go very well with a carburetor 14 to 16mm in SHA.
Reference: 215.0350
Ideal in case of breakage, wear your old pipe ... special admission for casings POLINI engines.
Reference: CAL01RRD
RRD PERFORMANCES wedge for re-orientation and adaptation of MINARELLI AM6 / DERBI valves / pipe on MOTOBECANE AV10 / MBK 51 engine with POLINI housings.
Reference: 20 5123
Out of production.
Reference: 13800213
The intake pipe pack + valves G1 / G2 BIDALOT!
Reference: 02 5035B
The best to repair or modify the size of your MALOSSI valve boxes on your PEUGEOT 103 or MBK 51.
Reference: 144.270.001
Flexible polini pipe 21mm for mini-moto and cross 2T POLINI, or mounting on POLINI crankcases with PEUGEOT 103 and MBK 51 supports!
Reference: 1314916B
Ø32mm spare sleeve angled at 90 ° internal for MALOSSI admission kit on VESPA 80, 125, 200 ...
Reference: 317.0005
Set of 2 M6 studs that can be used for many applications.