Reference: 247751
Valves DOPPLER ER2 for MBK 51 / MOTOBECANE AV10
A well worked room for a considerable performance boost on your MBK.
Banner
Ideal for mounting your flexible carburettors from 17 to 21mm, it is extremely short and well venturized / studied. Flexible sleeve delivered with this pipe, as well as the 2 clamps, you can install your carburettors from 17 to 21mm flexible mounting (diameter of fixing on the sleeve from 21 to 25mm).
The ideal thing would be to mount it with MALOSSI VL2 valves and to align the pipe at the entrance of the valves, all while breaking the entry angles of the front valves. This pipe is delivered quite raw, to be reworked if possible! Ideal for preparers.
Made in 3D printing by powder sintering. This process makes it possible to offer an optimum shape of the intake ducts.
Inventory of the different parts:
- 1 pipe
- 4 screws (number identical to the fixing point)
- 4 washers (number identical to the fixing point)
-1 sleeve
WARNING: the material used is sensitive to tightening, it is imperative not to exceed the tightening torque (4Nm), and not to forget to use the washers provided. In the case of incomplete sealing, favor the use of the joint bracket, rather than excessive tightening of the screws which would cause deformation of the sole.
Reference: 247751
A well worked room for a considerable performance boost on your MBK.
Reference: 293370
A quality sleeve that absorbs vibrations very well for better gas flow.
Reference: 215.0245
High-end POLINI 15mm diameter valve box for MBK 51.
Reference: 02 6090B
A pipe of very good quality as usual at MALOSSI. This pipe is micro-blasted to prevent gas rebounds. It will agree very well with a 15mm carburetor.
Reference: 1314916B
Ø32mm spare sleeve angled at 90 ° internal for MALOSSI admission kit on VESPA 80, 125, 200 ...
Reference: 215.0246
High-end 19mm diameter valve box POLINI for MBK 51.
Reference: 159643
At a good price and ideal to accompany a 15 mm PHBG and SHA 14-15-16 carburettor on your MBK 51.
Reference: 13800213
The intake pipe pack + valves G1 / G2 BIDALOT!
Reference: 1408
At a good price and ideal to accompany a 14 to 16mm SHA carburetor on your MBK 51.
Reference: 02 6704
A pipe especially for MALOSSI G2 housing but few also be mounted on DERBI EURO 1, 2 and 3. It was created to mount your 24mm carburetors (RIGID PHBG or with flexible sleeve for passage).
Reference: 20 5123
Out of production.
Reference: CAL01RRD
RRD PERFORMANCES wedge for re-orientation and adaptation of MINARELLI AM6 / DERBI valves / pipe on MOTOBECANE AV10 / MBK 51 engine with POLINI housings.
Reference: 51305.05
For performance and strong motor! Accompanied with a rigid SHA carburetor 15 to 16mm.
Reference: 02 6039B
A pipe created to match a 21 PHBG carburetor. This pipe is micro-blasted to prevent gas rebounds. Clearly it will mount a larger carburetor while gaining power.
Reference: 02 2962B
A fairly short pipe for maximum performance. It is mounted with a 15mm carburetor. In a very clear well studied and finished pipe for a good earning power of your engine.
Reference: 144.270.001
Flexible polini pipe 21mm for mini-moto and cross 2T POLINI, or mounting on POLINI crankcases with PEUGEOT 103 and MBK 51 supports!
Reference: 1415
A pipe with a correct finish that will go very well with a carburetor 14 to 16mm in SHA.
Reference: 928.270.006
POLINI pipe for THOR engine or adaptation on PEUGEOT 103 / MBK 51 requiring an elbow admission!