• Banner

Cylinder - piston without cylinder head BARIKIT Racing cast iron 70cc Ø47mm DERBI euro 3
  • Cylinder - piston without cylinder head BARIKIT Racing cast iron 70cc Ø47mm DERBI euro 3

Cylinder - piston without cylinder head BARIKIT Racing cast iron 70cc Ø47mm DERBI euro 3 & 4

CIL-749

Cylinder without cylinder head with a diameter of 48 mm, 5 transfers and exhaust with boosters, displacement of 70cc. For 50cc motorbike equipped with the DERBI EURO 3 and 4 engine. Guaranteed performance by accompanying it with the cylinder head specific to this model.

€120.83
Quantity
Shipping in 7 to 12 days depending on arrivals BARIKIT

Description

Attention, prohibited on open road! This cylinder exceeding the engine displacement of 50cc is only reserved for competition on the circuit, run ...! To accompany its Ø48 mm cylinder head with stud, available in accessory link.

Here is the BARIKIT Racing cast iron cylinder / piston without cylinder head which is a very rare model and rarely sold. This model has 4 side transfers plus a rear, in addition, it has a boosters exhaust. It is the most special cast iron on the market. With its Ø47mm bore it offers real 67.66cc To preserve good strength, BARIKIT used a very high-end cast iron and fitted a two-segment piston to slow down the high speed. The admission is therefore made by 5 transfers, the exhaust is very wide and has 2 boosters.

vue admission Cylindre - piston sans culasse BARIKIT Racing fonte 70cc Ø47mm DERBI euro 3

The piston is therefore a model with 2 segments in order to slightly slow the high speed for the benefit of torque and strength, these segments are very thin (1mm), they are also chrome, treated, lapped.

vue Cylindre - piston sans culasse BARIKIT Racing fonte 70cc Ø47mm DERBI euro 3

In the end, this cylinder is a model with very torquey diagrams, it is relatively powerful and very solid. Nothing prevents you from mounting it with a 43mm stroke, which would give you a 75cc cast iron kit overpowered and out of the ordinary. We recommend mounting this kit with: 19 or 21 mm carburetion, racing exhaust, reinforced crankshaft, reinforced clutch and reinforced bearings.

vue echappement Cylindre - piston sans culasse BARIKIT Racing fonte 70cc Ø47mm DERBI euro 3

The pack contains:

Ø47mm cast iron cylinder with 5 intake transfers and boosters exhaust.
Bi segment piston Ø47mm.
Piston pin Ø12 X 40mm.
Complete attached pack.
X2 hard chrome domed segments 1mm thick.

vue piston entrant Cylindre - piston sans culasse BARIKIT Racing fonte 70cc Ø47mm DERBI euro 3

As an option we offer a stage 1 preparation, this preparation is a modification of the channels and the exhaust port by increasing the diagrams and improving the duct, it increases the performance of the cylinder. An improvement to the piston and the bottom of the skirt is also included in this modification. Allow a little extra time for this preparation!

zoom Cylindre - piston sans culasse BARIKIT Racing fonte 70cc Ø47mm DERBI euro 3

Product Details
CIL-749
New product
You might also like
10 other products in the same category:

Reference: 3113220

MALOSSI MHR

Cylinder / piston kit without cylinder head MALOSSI replica aluminum 80cc Ø50mm Derbi euro 3 & 4

The famous MHR TEAM 80cc for derbi, standard race and original size transfers of course ... But what power! What a couple and what solidity !! One of the best normal races on the market!

Price €183.99 Regular price €199.99
Attention, may require a delay of more than 20 days
More
Attention, may require a delay of more than 20 days

Reference: CI.12.775.G

ITALKIT

Cylinder - piston without cylinder head ITALKIT Racing aluminum 80cc Ø47.6mm special 44.90mm stroke DERBI euro 3 & 4

Cylinder / piston without replacement cylinder head, kit 80cc Ø47,6mm, 6 transfers, big exhaust to booster, .... To be accompanied by a 44.90mm long stroke crankshaft and its cylinder head with high compression stud.

Price €167.49
Attention, requires a period of more than 20 days!
More
Attention, requires a period of more than 20 days!

Reference: CI.12.788.GR1

ITALKIT

Cylinder - piston without cylinder head ITALKIT Racing aluminum 75cc Ø47,6mm special 42mm stroke DERBI euro 3 & 4

Cylinder / piston without replacement cylinder head, kit 75cc Ø47,6mm, 6 transfers, big exhaust to booster, .... To be accompanied by a 42.00mm long stroke crankshaft and its high compression stud cylinder head.

Price €166.66
Attention, requires a period of more than 20 days!
More
Attention, requires a period of more than 20 days!