Reference: 12132870
Reinforced crankshaft connecting rod long size (Length 90, 95mm, crank pin Ø18mm, axis 12mm) engine DERBI euro 1, 2, 3 & 4
BIDALOT Racing Factory spare connecting rod for low competition engine DERBI euro 1.2, 3 and 4.
Banner
Here is the set of 2 bearings + 2 crankshaft oil seals for mécaboite driving DERBI Euro 1, 2, 3 and Euro 4, marketed by BARIKIT under the SNR brand, this set has been specifically selected to fit perfectly on a slightly prepared configuration or original engine with Ø20mm bristle crankshaft not exceeding 12 to 13,000 rpm This pack therefore consists of 2 C3 model bearings with riveted steel cage, Ø20mm X Ø47mm X 14mm thick and a set of 2 viton racing spy joints.
C3 Ø20mm bearings will allow better resistance and reinforcement of your original low engine or on a small configuration. More limited in terms of collection of high revs than C4 or Celeron models, be careful to choose your pack according to your engine and the desired use (competition or driving every day ...).
Characteristics:
-X2 C3 bearings diameter Ø20mm X 47mm X thickness 14mm
-X2 spy joints 20X35X7mm
Reference: 12132870
BIDALOT Racing Factory spare connecting rod for low competition engine DERBI euro 1.2, 3 and 4.
Reference: 508298
Ideal for raising your diagrams or for fitting a 44mm long stroke crankshaft on DERBI euro 1 and 2 engine. Digitally machined aluminum wedge.
Reference: 478942
Strong and very good quality bearing at an affordable price.
Reference: 9929200
Reinforced bearings that will support large configurations without any problem.
Reference: 508296
Ideal for raising your diagrams or for fitting a 42mm long stroke crankshaft on DERBI euro 1 and 2 engine. Digitally machined aluminum wedge.
Reference: KK01008
Good quality bearing and oil seal at an affordable price.
Reference: JAC-02
Ideal for a raiser of your charts or fitting a crankshaft long race 43mm on engine DERBI euro 1 and 2. Cale numerically machined aluminum.
Reference: 285.0004
Top-of-the-range Viton oil seals offering minimum friction and perfect engine sealing.
Reference: 7961
C3 bearings that will support large configurations without any problems.
Reference: 282.0004
Reinforced bearings and spy seal studied for competition!
Reference: 329079
A set of 2 high end spy joints for DERBI engine, models with double lips.
Reference: 517159
Pinion, gear from CONTI allowing the assembly of a DERBI EURO 3 crankshaft on DERBI EURO 2.
Reference: KCR-09
An ideal pack to strengthen your low engine on a prepared configuration developing high speeds! Special high speed C4 bearings and Viton spy seals!
Reference: 040921B
Spy joints ideal for refurbishing your low engine, low price guaranteed!
Reference: 14103358
Ideal in case of breakage or loss for a really solid assembly of your PVL ignition or other.
Reference: 451469
A complete high-end engine repair kit, ARTEIN seals, NTN bearings ... For DERBI euro 1 and 2 engines.