Reference: 30 3479
transparent tank MALOSSI for carburettor DELLORTO PHBE / SZ with Power Jet
Transparent tank racing for permanent control and quality on your carburetor with Power Jet!
Banner
Screw Ø8mm gas inlet on carburettor DELLORTO PHBE pipette, PHBH, PHBL, PHF, PHM ... true DELLORTO hardware quality. Delivered only as shown in the unit without joint.
6mm diameter, total length of the screw 21, for key 10.
Example of application on dual pipette mounted carburettor DELLORTO PHBE HS 36.
Reference: 30 3479
Transparent tank racing for permanent control and quality on your carburetor with Power Jet!
Reference: 10557_00
Special tank for big PHBE carburetors. Scheduled to be held with fitting cap.
Reference: 01476_00
The original cap of all DELLORTO carburetor. Perfect for any loss or breakage of your old cap.
Reference: 09796_00
Float balance for essential spare in case of loss or wear your old room!
Reference: 263991
A complete kit that will allow you to pass your cables as you wish.
Reference: 08542_00
Screw essential for maintaining your bushel cover. In addition to this, you need to know more about it.
Reference: 3014909
For permanent visual on the state of your tank on carburettor PHBH & PHBL.
Reference: 07346_00
Indispensable for the maintenance and operation of your carburetor.
Reference: 1297
A small spring that is important. Ideal for lost or worn for a refurbishment cost.
Reference: 26 4189
Ideal for lost or modify the passage of your cable.
Reference: 09042_00
Screw essential for maintaining your connection and fixing your air filter.
Reference: 1282
Ideal for lost or just for a refurbishment without spending too much.
Reference: 343.0021
Ideal in case of loss or to pass your cable as desired.
Reference: 08525_00
Indispensable for any loss or breakage of your old retaining rings.
Reference: 07890_00
Ideal in case of wear, breakage or loss of your old room. Double entry model for a gas arrival in your enhanced carburetion.
Reference: 53129_00
Ideal in case of loss or to pass your cable as desired.