Reference: S/59/2
Segment chrome domed kit for hard Ø47,6mm BARIKIT Racing mono-segment on vertical scooter minarelli
Ideal in case of loss of compression to deliver its high engine renovated.
Banner
BARIKIT is a Spanish brand that offers a comprehensive catalog of various engine parts for scooters and motorcycles old and new!
BARIKIT is present since the late 90s in Spain, BARIKIT was originally a large piston manufacturer competition or replacing the original, little by little they have diversified into crankshafts, valves, cylinders, cylinder heads, exhaust ... These various parts are outsourced recess and not manufactured by the house BARIKIT, however they innovate in specific outgoing and friendly products with affordable prices, in addition, the material selected by BARIKIT is always good standard! They have also evolved out their range BRK composed of very exclusive piece that are not found in other brands or cylinders FACTORY prepared a hand!
For us the main strength of this Spanish brand remains the diversity of the range, certainly many of their products are found elsewhere as they are not necessarily the primary manufacturers, however there are home crankshafts long runs of all types millet even films for Derbi engines euro 2 specific with balancer, we also find like-cylinder AIRSAL but higher diagrams, with yokes a plot with specific higher-end pistons, there are even thermal group old as MINARELLI RV4, Peugeot 103 and other models!
address:
CAMI PARETS 20
Polígon
El Congost
Telephone (Spain):
938401198
Fax (Spain):
938402295
Website:
www.barikit.com
There are 443 products.
Reference: S/59/2
Ideal in case of loss of compression to deliver its high engine renovated.
Reference: BP-1045
Replacement piston pin delivered with its clips.
Reference: BP-1017
Replacement piston pin delivered with its clips.
Reference: S/40/3
Provides a good compression or replace in case of damage to the installation!
Reference: S/100/4
Ideal in the event of loss of compression to restore its high engine to nine.
Reference: S/7/12
Ideal when tightening begins, heating ... for refurbishment!
Reference: S/37/4
Ideal when tightening begins, heating ... for refurbishment!
Reference: s/23/4
Segment of very good quality, ideal for the maintenance of your high engine kit in diameter 43mm.
Reference: S/12/9
Replacement segment ideal for the maintenance of your minarelli am6 engine equipped with 50cc cast iron BARIKIT in diameter Ø40,3mm.
Reference: JUN-771
Essential for refurbishing your BARIKIT high engine.
Reference: s/26/1
Segment of very good quality, ideal for the maintenance of your high engine kit in diameter 44mm.
Reference: S/120/1
A complete set of segments to maintain your kit Ø57,4mm 150cc BARIKIT aluminum.
Reference: JP03
A reinforced needle cage which will allow you to fit all the engines on the market without risk of breakage.
Reference: GOM-01
Pliable quality, fixing Ø33 to 36mm on each side!
Reference: S/12
Indispensable to revive your high engine in the event of compression losses, priming or tightening.
Reference: S/15/2
Essential for maintaining your kit 50cc cast BARIKIT diameter 41mm!
Reference: GOM-02
Quality flexible sleeve, fixing Ø34 to 38mm on each side!
Reference: JP01
Needle cage mounted on many models of crankshaft and engines!
Reference: JUN-985
Pack complete high engine seal. Ideal for safe and leak-free mounting.
Reference: JP04
Reinforced needle cage, mounts on many models of crankshaft and engines!
Reference: JUN-749
Ideal for tight and leak-free reassembly for optimal operation of your engine.