Reference: 503829
Integrated high voltage CDI coil TEKNIX original type for ignition BETA 50 RR SM, TRACK, MOTARD ... from 2005 to 2012
High voltage coil with integrated unbridled CDI with 2 lugs with ground wire and its high voltage wiring.
Banner
The MALOSSI TC UNIT K15 pack is a very interesting product for am6, derbi euro 2 or even euro 3 engine pocessors with 6-pole DUCATI ignition. This pack will transform your original ignition into a high performance ignition while preserving the strength, lighting and all the advantages of the original ignition. It is relatively easy to assemble, no need to disassemble your original flywheel (rotor)! This pack in the first place will totally unleash your original ignition so that it is no longer limited in maximum rpm.
The curve is calculated to follow with powerful engines, so this pack will allow you to reveal all that your engine has in the belly. These electronic control units have a constant discharge voltage and thus make it possible to limit as much as possible the inconvenience during the voltage discharge, they allow to obtain an almost perfect voltage point on the spark plug (35,000 - 50,000 volts depending on the engine speed). motor). In addition, they give extremely high discharge voltages and discharge current with surprising consistency when we see the variations in revolutions per minute of the motor. MALOSSI affirms that this pack can continue to follow at 20,000 rpm and more!
The little extra of this MALOSSI pack compared to the competition: this Malossi pack has a switch and an adjustable slider in order to be able to limit the rpm! This bridle can be practical for your break-ins and will allow you to be limited to the speed of your choice! We will have appreciated that malossi for more solidity and performance made a separate high voltage cdi / coil.
Attention, it is mounted on DUCATI 6-pole ignition (coils) only. This pack cannot be mounted on Yamaha tzr, mbk x-power… and all these 12-pole models.
Spare parts :
Reference: 503829
High voltage coil with integrated unbridled CDI with 2 lugs with ground wire and its high voltage wiring.
Reference: 478410
Coil with integrated CDI with 4 branches without mass.
Reference: 171.0640
Ideal for repairing your ignitions POLINI 4 curves!
Reference: 14130114
High quality high voltage coil for BIDALOT & PVL ignition.
Reference: EVB.1
High quality and guaranteed performance ignition coil SELETTRA ITALKIT for digital ignition with variable advance on moped, scooter and mécaboite.
Reference: 450446
Coil with integrated CDI unbridled with 4 terminals with ground wire.
Reference: 169345
A real asset to prepare your original ignition and offer you guaranteed power gain!
Reference: S410010392001
For unbridled ignition and a considerable increase in power thanks to its beach reviewed and corrected. For ignitions with 3 branches with mass.
Reference: PX20
Ideal in case of wear or breakage of your old reel.
Reference: 171.0666
High quality high voltage coil for BIDALOT & PVL ignition.
Reference: 9910150
A real asset to prepare your original ignition and offer you a guaranteed power saving!
Reference: CA00009
Original coil with integrated CDI unbridled with 4 branches without mass.
Reference: 9921690
A high-end preparation kit to prepare your original ignition on minarelli am6.
Reference: 15158
Coil with integrated CDI unbridled with 4 terminals with ground wire.
Reference: EB.KZA
High quality and guaranteed performance, SELETTRA ITALKIT ignition coil for analog ignition with fixed advance on moped, mécaboite and scooter.
Reference: 440149
Coil with integrated CDI unbridled 4 branches without mass.