Reference: 20 5123
§ Transmission valves Ø19mm 4 plates with pipe MALOSSI MBK 51, motobecane AV10
Out of production.
Banner
The CGN Ø18mm straight pipe is intended for the mounting of a rigid or flexible dellorto PHBG carburettor from Ø17.5 to 20mm, this pipe is mounted on the original engine casings of MBK 51 / Motobecane av10. This intake pipe reduces the distance between the carburetor and the engine, which amplifies the engine response and performance.
We will regret that it is not internally microblasted to prevent throttle rebounds, apart from that it is very solid and has a neat / polished look! Its output is 22 by 20mm. You can easily fit a flexible carburetor with a sleeve!
Reference: 20 5123
Out of production.
Reference: 02 6704
A pipe especially for MALOSSI G2 housing but few also be mounted on DERBI EURO 1, 2 and 3. It was created to mount your 24mm carburetors (RIGID PHBG or with flexible sleeve for passage).
Reference: 317.0005
Set of 2 M6 studs that can be used for many applications.
Reference: 159643
At a good price and ideal to accompany a 15 mm PHBG and SHA 14-15-16 carburettor on your MBK 51.
Reference: 02 6039B
A pipe created to match a 21 PHBG carburetor. This pipe is micro-blasted to prevent gas rebounds. Clearly it will mount a larger carburetor while gaining power.
Reference: 365952
A perfect pipe for mounting a carburetor in flexible mounting with a diameter of 17 to 21mm. It is very short and very well ventilated to have a good gain in power.
Reference: 215.0242
Top model ideal for mounting a carburetor SHA 15 or 16mm on your MBK 51.
Reference: 02 2962B
A fairly short pipe for maximum performance. It is mounted with a 15mm carburetor. In a very clear well studied and finished pipe for a good earning power of your engine.
Reference: CAL01RRD
RRD PERFORMANCES wedge for re-orientation and adaptation of MINARELLI AM6 / DERBI valves / pipe on MOTOBECANE AV10 / MBK 51 engine with POLINI housings.
Reference: 02 6090B
A pipe of very good quality as usual at MALOSSI. This pipe is micro-blasted to prevent gas rebounds. It will agree very well with a 15mm carburetor.
Reference: 13800213
The intake pipe pack + valves G1 / G2 BIDALOT!
Reference: 215.0350
Ideal in case of breakage, wear your old pipe ... special admission for casings POLINI engines.
Reference: 215.0246
High-end 19mm diameter valve box POLINI for MBK 51.
Reference: 215.0245
High-end POLINI 15mm diameter valve box for MBK 51.
Reference: 1314916B
Ø32mm spare sleeve angled at 90 ° internal for MALOSSI admission kit on VESPA 80, 125, 200 ...
Reference: 1415
A pipe with a correct finish that will go very well with a carburetor 14 to 16mm in SHA.