• Banner

Kit 70cc Ø47mm BARIKIT Sport 1 cast iron minarelli am6
  • Kit 70cc Ø47mm BARIKIT Sport 1 cast iron minarelli am6

Kit 70cc Ø47mm BARIKIT Sport 1 cast iron minarelli am6

EQ-715

The famous 7 Ø47mm cast iron transfers with oval exhaust for minarelli am6 engine, Sport 1 version with single monoblock cylinder head in frustoconical shape, thicker segmentation ....

Stage 1 engine preparation
€150.83
Quantity
Shipping in 7 to 12 days depending on arrivals BARIKIT

Description

Not homologated on the public road, only reserved for racing on circuit, does not respect in any case the rules of the road!

Here is the thermal group of the Spanish brand BARIKIT, Sport 1 cast iron version very little widespread and yet powerful. This model has 6 lateral transfers and a rear, moreover, it has an oval exhaust significantly widened output Ø28mm (unfortunately not supplied with wedge for passage Ø25mm). With its Ø47mm bore, it offers no less than 71.98cc real racing origin 39.00mm.

zoom Kit 70cc Ø47mm BARIKIT Sport 1 fonte minarelli am6

To maintain good strength, BARIKIT used very good quality cast iron materials and installed a bi-segment piston. The admission is made by 7 transfers, the 2 X 3 side greatly improve the filling of the admission.This architecture is very worked and offers a lot of performance, its internal finish is very good too.

zoom interne Kit 70cc Ø47mm BARIKIT Sport 1 fonte minarelli am6

The bi-segment solid aluminum piston will be a major asset in the torque, the strength of the engine and the slowdown of high speeds by increasing friction, these two segments are moderately thin (1.5mm), they are made of non-chromium steels.

piston Kit 70cc Ø47mm BARIKIT Sport 1 fonte minarelli am6

The cylinder head is a simple monoblock model (one part) in aluminum with frustoconical combustion chamber, high compression, polished finish. The latter is mounted on O-ring at the joint plane and provides with screws and antifreeze.

culasse Kit 70cc Ø47mm BARIKIT Sport 1 fonte minarelli am6

Unlike the Sport 2 thermal unit, which has a single-piece hemispherical cylinder head with a carburizing plug directly installed on the cylinder head, the O-ring used at the joint plane is also different.

plan de joint Kit 70cc Ø47mm BARIKIT Sport 1 fonte minarelli am6

In summary, this high complete engine is a model with diagrams optimized for the couple, it is of course relatively powerful and especially very solid. Nothing prevents you to put it with a long stroke plus a suitable shim under the cylinder to develop a cast iron kit in supercharged upper capacity and out of common.

échappement Kit 70cc Ø47mm BARIKIT Sport 1 fonte minarelli am6

We recommend mounting this kit with at least: 19 or 21 mm carburettor with flexible mounting, complete intake kit, racing exhaust, reinforced crankshaft, reinforced bearings, Iridium racing cold spark plug, 100% synthetic racing engine oil ....

transferts Kit 70cc Ø47mm BARIKIT Sport 1 fonte minarelli am6


This pack contains:

Ø47mm cast iron 70cc cylinder with 7 transfers and an enlarged oval escapement
-Compass monoblock high compression chamber frustoconical
-Piston bi-segments Ø47mm
-X2 end segments in steels Ø47 X 1,5mm
-Axle of piston Ø12mm X 39mm of length
-Plunches of piston type crab
-Joints engine
-Visserie
-Autocollant

vue Kit 70cc Ø47mm BARIKIT Sport 1 fonte minarelli am6

Optionally we offer a stage 1 preparation, this preparation is a modification of the channels and exhaust light by increasing the diagrams and improving the pipe, it increases the performance of the cylinder. An improvement of the piston and skirt stocking is also included in this modification. Allow a little extra time for this preparation!

Mounts on motorcycles 50cc has gearbox equipped with minarelli am3, am4, am5, am6 euro 1, am6 euro 2 :

APRILIA RS 50cc engine am6 from 1997 to 2006 (attention news after 2006 in derbi euro 3 engine)
APRILIA RX engine am6 (attention news after 2006 in derbi euro 3 engine)
APRILIA MX engine am6 (attention news after 2006 in derbi engine euro 3)
APRILIA TUONO 50cc engine am6 from 1997 to 2006 (attention news after 2006 in derbi engine euro 3)
BETA RR
BETA RR ALU
BETA CRE
HONDA HM
HONDA CRE
HONDA BAJA
HUSQUVARNA WXE
HUSQUVARNA CH
HM DERAPAGE
HM CRE
MALAGUTI DRAKON
MALAGUTI XTM
MALAGUTI XSM
FANTIC CABALLERO
PEUGEOT XP6
PEUGEOT XPS
MOTORHISPANIA RYZ
PEUGEOT XPS
PEUGEOT XP STREET
PEUGEOT XP STREET EVO
PEUGEOT XR6
MOTORHISPANIA RX
PEUGEOT XR7
MOTORHISPANIA RX-R
RIAJU RS1
RIEJU RS2
RIEJU RS2 MATRIX
RIEJU RS2 MATRIX PRO
RIEJU SMX
RIEJU MRX
RIEJU SPIKE
KEEWAY TX EN
YAMAHA DT
MBK X-LIMIT
YAMAHA TZR
MBK X-POWER
SHERCO SM
SHERCO ENDURO
SHERCO HRD
SHERCO ENDURO

And many other machines!

Product Details
EQ-715
New product

Data sheet

Refroidissement
Liquid
Displacement:
70cc (advertised)
Transferts a l'embase
Like the origin (aligned to the original casings)
Lumière d'échappement
Oval
Diameter (Ø):
47mm
Nombre de segment
Bi-segment (2 segments)
Course
39.00mm (original AM6)
Cylindrée réelle
71.98cc
Echappement
Ø 28mm (as original euro 1)
Nombre de transferts d'admission
7 transfers
Matière
Melting
Cylinder head:
Simple tapered

Specific References

ean13
8435031115737
You might also like
16 other products in the same category:

Reference: EQ-987-S

BARIKIT

Kit 80cc Ø50mm aluminum BARIKIT Racing minarelli am6

A large diameter 50mm durable aluminum with 5 transfers and exhaust with bar, incoming high compression type of cylinder head. 50cc motorcycle equipped with the engine minarelli am6. Assured performance!

Price €195.83
Shipping in 7 to 12 days depending on arrivals BARIKIT
More
Shipping in 7 to 12 days depending on arrivals BARIKIT

Reference: EQ-1034-S

BRK Competition Systems By BARIKIT

Kit 80cc Ø50mm BARIKIT BRK Racing 2 aluminum cylinder head minarelli am6

The famous 50mm (80cc) aluminum BARIKIT BRK Racing with high compression cylinder head with bi-part stud! A very powerful cylinder with 5 transfers worked, big exhaust with bar, piston mono segment ....

Price €241.66
Shipping in 7 to 12 days depending on BARIKIT factory arrivals
More
Shipping in 7 to 12 days depending on BARIKIT factory arrivals

Reference: 30432.M3

SIMONINI RACING

Kit 70cc Ø47,6mm SIMONINI Racing aluminum minarelli am6

Although little known in FRANCE, LUXEMBOURG, SPAIN ... This kit is all the rage in Italy, the small SIMOININI for short stroke is simple, solid and gives a great couple!

Price €171.66
Shipping in 8 to 25 days depending on arrivals SIMONINI
More
Shipping in 8 to 25 days depending on arrivals SIMONINI