• Banner

Cylinder - piston without cylinder head AIRSAL Luxe cast iron 70cc Ø48mm for Minarelli AM6
  • Cylinder - piston without cylinder head AIRSAL Luxe cast iron 70cc Ø48mm for Minarelli AM6

Cylinder - piston without cylinder head AIRSAL Luxe cast iron 70cc Ø48mm for Minarelli AM6

H02138248

A much more solid kit than the aluminum models and which remains very torquey. Perfect for riding long distances every day without being afraid of a heater or primer.

€96.66
Quantity
Shipping in 20 to 90 days depending on factory arrivals.

Description

Here is the brand new 70cc kit from AIRSAL. After a frank success in aluminum kits, AIRSAL finally released these font kits!

 

 

You should know that a cast iron kit is more solid on long journeys, so it provides additional reliability but gives a little less power than an aluminum kit.

 

 

This model is Ø48mm in diameter, a real 70.5cc! It is a very good high engine, very well finished which will bring much better performance to your machine without compromising on solidity. It is of course equipped with a bi-segment piston for better torque and sweeping. it has 5 transfers, the sides at the base are well worked. The internal sides are nicely drawn.

 

 

In summary this kit will give you very good performance especially at low revs while having excellent solidity.

 

 

We recommend accompanying this kit with: 19mm carburetion (0.30mm or 0.35mm carbon valve slats), reinforced crankshaft and bearings, racing exhaust, racing spark plug, etc.


Optionally we offer you a stage 1 preparation, this preparation is a modification of the channels and the exhaust light by increasing the diagrams and improving the duct, it increases the performance of the cylinder. An improvement in the piston and bottom of the skirt is also included in this modification. Allow a little extra time for this preparation!

This high engine mounts on 50cc motorcycles with the following gearbox equipped with the MINARELLI AM3, AM4, AM5, AM6 euro 1, AM6 euro 2 engine:

-APRILIA RS AM6 engine from 1997 to 2006 (after 2006, beware of DERBI euro 3 engines)
-APRILIA RX AM6 engine (after 2006, watch out for DERBI euro 3 engines)
-APRILIA MX AM6 engine (after 2006, watch out for DERBI euro 3 engines)

-BETA CRE

-BETA RR
-BETA RR ALU

-HONDA HM
-HONDA CRE
-HONDA BAJA

-HUSQUVARNA WXE
-HUSQUVARNA CH

-HM SKIDDING
-HM CRE
-MALAGUTI DRAKON

-MALAGUTI XTM
-MALAGUTI XSM

-FANTIC CABALLERO

-PE PEUGEOT XP6
-PE PEUGEOT XPS
-PE PEUGEOT XP STREET
-PE PEUGEOT XP STREET EVO
-PE PEUGEOT XR6
-PE PEUGEOT XR7

-MOTORHISPANIA RYZ
-MOTORHISPANIA RX-R
-MOTORHISPANIA RX

-RIEJU RS1
-RIEJU RS2
-RIEJU RS2 MATRIX
-RIEJU RS2 MATRIX PRO
-RIEJU SMX
-RIEJU MRX
-RIEJU SPIKE

-KEEWAY TX IN

-YAMAHA DT
-MBK X-LIMIT
-YAMAHA TZR
-MBK X-POWER

-SHERCO SM
-SHERCO ENDURO
-SHERCO HRD
-SHERCO ENDURO

 

And many other machines!

Product Details
H02138248
New product
You might also like
10 other products in the same category:

Reference: CI.44.849.GR2

ITALKIT

Cylinder - Cylinder without piston aluminum ITALKIT Racing 80cc Ø48mm special 44mm 90mm rod racing for minarelli am6

Cylinder / piston without cylinder head replacement kit 80cc Ø48mm, 6 transfers, large 32mm exhaust .... To accompany a 44,00mm long stroke crankshaft with 90mm rod and only its head high compression pad.

Price €203.33
Attention, requires a period of more than 20 days!
More
Attention, requires a period of more than 20 days!