Banner
Crank quality and good price! Long stroke model with 45mm rod 85mm reinforced.
Here is the AIRSAL racing crankshaft. It was released to accompany the high engine AIRSAL red Xtrem race 45mm on minarelli am6 . You can mount it with other cylinder without problems! TPR aluminum Ø50mm to 44mm stroke such as by placing a hold of 0,5mm or many other models.
It is good, solid masses in order to offer more pre compression, the masses ro Uges prove the presence of a neat and worked balancing. It is equipped with a reinforced rod with polished finish. The rod rests on an increased cage reinforced, a crank pin diameter plus in Ø18mm well as anti-friction wedges. To our regret, this crankshaft preserves silks in Ø17mm like the origin, it also preserves a rod length of 85mm as the origin.
Which certainly offers more pre compression, closer injection but which greatly limits the high speeds and strength by increasing the friction! His balance is not specifically made to accommodate the famous high Xtrem engine. The cage is delivered Ø12X16X16mm model. Clearly, this is a very good long stroke crankshaft, not a performance monster away from but a very good price / quality ratio.
summary:
-Équilibrage: Yes
-Maneton: Ø18mm
-Bielle: 85mm as the origin
-Course: 45mm against 39mm for the origin
-A Ride with: Xtreme kit / kit for race 39mm with bilge 3mm / 44mm kit to race with shim 0,5mm ...
-Soies: Ø17mm
-Cage A connecting rod needle: Ø12XØ16XL16mm
Masses: full
Fits the 50cc motorcycles gearbox equipped minarelli am3, am4, am5, am6 euro 1 am6 euro 2:
Aprilia RS 50cc am6 from 1997 to 2006 (new attention after 2006 engine derbi euro 3)
Aprilia RX am6 engine (new attention after 2006 engine derbi euro 3)
Am6 APRILIA MX engine (new attention after 2006 engine derbi euro 3)
Aprilia Tuono 1997 am6 50cc engine 2006 (new attention after 2006 engine derbi euro 3)
BETA RR
BETA RR ALU
BETA CRE
HM HONDA
HONDA CRE
HONDA BAJA
HUSQUVARNA WXE
HUSQUVARNA CH
HM DERAPAGE
HM CRE
MALAGUTI DRAKON
MALAGUTI XTM
MALAGUTI XSM
FANTIC CABALLERO
PEUGEOT XP6
Peugeot XPS
MOTORHISPANIA RYZ
Peugeot XPS
PEUGEOT XP STREET
PEUGEOT XP STREET EVO
Peugeot XR6
MOTORHISPANIA RX
PEUGEOT XR7
MOTORHISPANIA RX-R
RIAJU RS1
RS2 RIEJU
RIEJU RS2 MATRIX
RIEJU RS2 MATRIX PRO
SMX RIEJU
RIEJU MRX
RIEJU SPIKE
KEEWAY TX EN
YAMAHA DT
MBK X-LIMIT
YAMAHA TZR
MBK X-POWER
SHERCO SM
SHERCO ENDURO
SHERCO HRD
SHERCO ENDURO
CPI SM
And many other machines!
Reference: 01137550
The most powerful kit of AIRSAL house for minarelli am6! This XTREM version must be accompanied by adequate 45mm stroke crankshaft!
Reference: 12100962
An upscale crankshaft 48mm long stage race to accompany a high BIDALOT FACTORY 94cc engine with machining of crankcase!
Reference: CIG-133R
A reinforced crankshaft for a low solid engine, ideal to accompany a prepared configuration! Stroke slightly increased to 40.7mm!
Reference: CB.44.10
A crankshaft of high quality with a rod casting 85mm, 44mm stroke, delivered with its bearings celeron Ø20mm big litter !!!
Reference: CB.44.10R14
Crankset special long stroke 44.00mm high-end, forged connecting rod machined in the mass 85mm, special axis of piston Ø14mm ... with silver treated needle cage and celeron bearings.
Reference: CIG-56
High quality crankshaft, special model 43mm long race 85mm rod.
Reference: 53440.14
A senior special crankshaft range 46mm long race 90mm rod!
Reference: 9920410
Vilo TOP PERFORMANCES TPR long race for your am6 engine, a concentrate of performance & quality at an attractive price!
Reference: 53460.14
A senior special crankshaft range 46mm long race 90mm rod, delivered with its bearings!
Reference: CB.44.10R
Mazzuchelli top-of-the-range 44.00mm long stroke special crankshaft, forged rod machined in the mass 85mm, ... with silver treated needle cage and C4 bearings.
Reference: CIG-88
Crankshaft high reinforced special long race 46mm rod 85mm with range.
Reference: 210.0069
POLINI crankshaft for the 100cc kit on MINARELLI AM6.
Reference: 80039
A carefully balanced crankshaft with premium materials for maximum strength.
Reference: CB.44.90.R
Mazzuchelli top-of-the-range 44.00mm long stroke special crankshaft, 90mm machined forged connecting rod for improved motor movement, ... with silver treated needle cage and celeron bearings.
Reference: 12100866
A high-end crankshaft, special long stroke 44.9mm to accompany a high engine BIDALOT FACTORY 80 or 88cc.
Reference: CIG-58
High quality crankshaft, special model 45mm long race 85mm rod.
Reference: CB.44.8
A horse race between normal and long, wedge assembly without machining or on your small gain am6 and engine capacity (+ 1mm travel).
Crank quality and good price! Long stroke model with 45mm rod 85mm reinforced.
