Reference: 7964
SKF reinforced steel cage bearing TEKNIX original size for MBK 51 / motobecane AV10 / AV7
High-end bearing with steel cage. Can support any configuration without problem.
Banner
Here is the reinforced and improved MALOSSI needle cage for MOTOBECANE / MBK 51 AV10 or AV7 engine. With such a cage you will always be safe from the risk of breakage or seizure! Very high quality, we recommend changing every 5,000 to 10,000 km depending on the power and engine rpm. Piston pin size to ask, diameter 13mm like the origin. It mounts on the original crankshafts, TEKNIX, BIDALOT, MALOSSI, PARMAKIT… Or another model.
This cage is also the replacement for the 50cc MALOSSI G2R (GR2/G2) kits, the MALOSSI MHR crankshaft for MBK 51.
Reference: 7964
High-end bearing with steel cage. Can support any configuration without problem.
Reference: 19 1910B
To have a variator that slides as well as possible.
Reference: 4121
A reinforced needle cage with improved lubrication which will therefore be able to support very large kits without spending a lot of time.
Reference: 502028
Hexagonal ignition nut ideal in case of breakage or wear for a good quality and safe reassembly.
Reference: 4497
Reinforced needle cage with improved lubrication.
Reference: 480974
Excellent in case of wear of your old nut.
Reference: RST.325
Reinforced model and of very high quality, ideal to avoid any breakage or seizing of your crankshaft.
Reference: 285.0110
High-end spinnaker seals for MBK 51.
Reference: 167982
Reinforced needle cage with improved lubrication.
Reference: rrd_cage_51
High performance RRD needle cage for your moped.
Reference: 541050O
A very practical tool to remove the bearings more easily from your crankshaft or other.
Reference: 4763
Ideal in case of breakage or wear for a good quality and safe reassembly.
Reference: 489602
Spare part essential in case of loss, wear ... of your old nut!
Reference: 12200213
Ideal to accompany a prepared engine! Spare pack for housings / crankshaft BIDALOT G1, G2 OPEN.
Reference: 481763
Ideal in case of loss or replacement of a worn nut! Can also be mounted on crankshafts not to the right of MBK 51, ignition side.
Reference: 506270
Ignition rotor nut 11x100mm not to the right for MBK 51 moped.