Reference: 53 5779
Crankshaft, connecting rod assembly reinforced MALOSSI MHR for MBK 51 / motobecane av10 / av7
The best crankshafts for your MBK 51, MOTOBECANE av10 or av7 engine.
Banner
Reinforced BIDALOT competition crankshaft, this model is dimensionally identical to the old G1 and G2. It is fitted with a reinforced connecting rod mounted on an anti-friction wedge, Ø16mm crankpin and reinforced connecting rod head cage. The side hammers prove the balancing quality which is very high.
The masses are obviously full but studied to preserve a good lubrication of big end while having a maximum of pre-compression. In short, this crankshaft is ultra reinforced, very well balanced and of very high quality, the steels used for manufacturing are top of the range, treated 3 times and case hardened, the balancing is carried out digitally, this crankshaft will therefore be suitable for small 50cc kits , to the most efficient 50cc kits on the market such as the Malossi G2 or to all 70CC kits.
Attention, you will have to put a cage of small end Ø13XØ16X 15 or 16mm like the malossi because it is not delivered with this crankshaft and does not exist in the catalog BIDALOT. This crankshaft preserves the Ø16mm silks, so you will need to fit original size bearings such as the POLINI or the BIDALOT racing celeron. Attention, this crankshaft being very used for competitions, it does not have keying! You will therefore need to have a setting gauge to properly set your ignition.
Summary :
bristles: Ø16mm as the origin
cage: not delivered with the crankshaft
crankpin: Ø16mm
connecting rod size: 85mm as the origin
masses: full
reinforced: yes foolproof
keying: no
Reference: 53 5779
The best crankshafts for your MBK 51, MOTOBECANE av10 or av7 engine.
Reference: 535505
Alas now unavailable because no longer manufactured! The famous long race for MBK 51, engine av7, av10 ...
Reference: 31140639
A good reinforced crankshaft offered at the lowest price on the market.
Reference: 6034072
A very good quality crankshaft that will support all your requirements in terms of robustness and performance.
Reference: rrd-cale-1-mm-AV7
1mm wedge in high quality machined aluminum for MBK / MOTOBECANE AV7. Ideal for laying down long runs to increase your charts!
Reference: CIG-135
The original reinforced version of BARIKIT crankshafts for MOTOBECANE / MBK 51, ignition thread on the left!
Reference: 441286
The most upscale on the market with the BIDALOT.
Reference: AMT 170M
Ideal to accompany a push configuration, 70cc or more! Specially designed for MBK MAGNUM. Standard right-hand tightening thread!
Reference: rrd-cale-1-5mm-AV7
1.5mm high quality aluminum shim machined for MBK / MOTOBECANE AV7. Ideal to put the long races to increase its diagrams!
Reference: AMT 170
Ideal to accompany a push configuration, 70cc or more! For MBK 51 / motobecane av10 / av7. Ignition thread reversed on the left!
Reference: 508823
A reinforced vilo with a super low price for your AV10 and AV7, reverse thread "not on the left".
Reference: AMT 036
Vilo an original type with a super low price for your 51! Thread spark left side (inverted).
Reference: 31140739
One of the best crankshaft on the market with top balancing, revised and corrected lubrication and of course with a top finish as usual at AIRSAL. Here is the direct competitor of the famous DOPPLER Endurance crankshaft.
Reference: rrd-44.9-51
Long stroke competition crankshaft 44.9mm for MOTOBECANE AV10 / AV7 / MBK 51 ...
Reference: 425
A very good quality mid-range crankshaft designed to go up to 14,000 rpm!
Reference: 4118
A reinforced vilo with a super low price for your 51!