Reference: 144.230.004
Single pipe elbow 95 ° offset POLINI reinforced Øinterne 18 to 20mm
POLINI hose for tip from 17 to 19mm.
Banner
This PIAGGIO ORIGINAL water pump is basically reserved for the PIAGGIO VESPA 150 and 125 GTS, but it can be used on other machines. Many brands have produced water pumps yes but... Unsuitable for our 2 wheels, too heavy, too big, badly oriented nettles, too greedy for current, too fragile and therefore inefficient. Identical to the POLINI 170.2050 pump but delivered without cables.
Thanks to it, you can finally replace the original water pump and thus improve the efficiency of your cooling! Intended for 50 to 150cc 2 or 4-stroke liquid-cooled scooters or motorcycles equipped with a mechanical water pump driven by the engine or electric.
It has several advantages, it eliminates friction and mechanical problems, it is silent and its assembly is really simple with an explanatory note provided and all the accessories necessary for its installation and operation.
That's not all, the internal electronic management of the pump has also been improved so as to maintain the scope of the constant supply range between 9 V and 15 V. It turns at 3200 rpm. IP55 protection standard. About 1200 liters / hour!
*Very small with straight outputs, it can be hidden, for example, behind the hearing of MBK 51, behind the radiator. For the purge, the tests, it starts with a simple 9V square battery!
Red wire on +12V DC (rectifier output, even without battery)
Black on ground
Ø of pipes: 20mm
Voltage 9 to 15V
Ideal voltage 12V
L per hour brewed: 1200L / H in the best case, i.e. 20L / Minute for 20w of consumption
Temperature: -40°C to 135°C
Speed: 3200 rpm under 12V
Reference: 144.230.004
POLINI hose for tip from 17 to 19mm.
Reference: 144.230.003
POLINI hose with internal diameter of 18mm therefore ideal for ends from 17 to 20mm.
Reference: 21 0870B
A high-end necklace that allows to squeeze harder without risk of breakage.
Reference: 133477
Transparent cooling hose internal diameter 20mm sold by 1m.
Reference: 174705
Ype original voltage with Rétgulateur Coisse 4 branch for motorcycles KTM and Yamaha 125cc 2T.
Reference: 107798 / 112652
Competition liquid, offers cooling down to -15 ° compared to a traditional liquid!
Reference: 21 0870B
A high-end necklace that allows to squeeze harder without risk of breakage.
Reference: 21 0866
A high-end collar that can tighten your tightening stronger without risk of breakage.
Reference: 170.2050
A high quality water pump that works from 9V up to 15V!
Reference: 21 0871B
A high-end collar that allows you to tighten your tightening more without risk of breakage.
Reference: 476549
An excellent top-of-the-range refrigerant and anti-corrosion coolant withstands down to -38 ° C.
Reference: 477403
Hose radiator or heat sink TUN 'R ideal to give style to your water circuit while cooling it.
Reference: 5616363
New in 2014, the best water pump on the market for improved and optimized cooling with guaranteed power gain!
Reference: 477400
TUN 'R hose radiator ideal for giving style to your water circuit while cooling it. 56mm long so easy to integrate!
Reference: 11026
A good quality necklace that can tighten your strongest clamping without risk of breakage.
Reference: 256.0010
It is a seal with the best components that currently exist for a perfect seal. WARNING LAST ITEM AVAILABLE!
Reference: 928.830.013
Calorstat / universal complete thermostat to be mounted on cooling hoses in Ø16 to 19mm.
Reference: 11031
A high-end necklace that can tighten your strongest clamping without risk of breakage.
Reference: 21 0865
A high-end collar that can tighten your tightening stronger without risk of breakage.
Reference: 501200
An excellent top-of-the-range refrigerant and anti-corrosion coolant withstands down to -40 ° C.
Reference: 311.0112
POLINI bolt connection for Minarelli or Piaggio and many other models.