Reference: JAC-09
BARIKIT 5mm base block for MINARELLI HORIZONTAL (ovetto, nitro, aerox, jog ...)
The shim necessary for crankshafts 85mm long connecting rod on horizontal minarelli!
Banner
Set of 4 elongated competition cylinder head nuts, very similar to MALOSSI if not identical. These nuts allow you to take out the fins on the air cylinder head and to be able to tighten them with the flat torque wrench therefore in the absence of any friction which allows you a perfect tightening. You will have to use them with 4 washers of course. Mount them with a little grease, so as to make a well-balanced tightening without forcing.
Length 35mm
Original type thread therefore M7 Peugeot 103 and MBK 51/motobecane (av10) av7...
Weight of the 4 nuts: 72 grams
Maximum thread size that can fit into the nut: 30mm
They are widely used in competition on air or even liquid cylinder head. Some have already spoken of virtues in cooling but they do not improve cooling in any way even if the heat exchange surface is clearly enlarged, steel remains a poor material in terms of heat exchange.
Reference: JAC-09
The shim necessary for crankshafts 85mm long connecting rod on horizontal minarelli!
Reference: 156263
Set of 4 M7 nuts with their 4 washers.
Reference: 9910050
Ideal for refurbishment of your high engine 70cc TOP PERFORMANCES minarelli horizontal liquid on motor scooter.
Reference: 87170000
Ideal in case of breakage, loss or worn thread of your old nut.
Reference: 87171100
Ideal in case of breakage, loss or worn thread of your old nut.
Reference: 27 8359B
Essential for the refurbishment of your cooling system.
Reference: 4755
Spare nut essential for mounting your high engine!
Reference: 28458
Nut true unity origin Peugeot for many applications.
Reference: JAC-07
The shim needed for crankshaft race long 42 / 43mm on minarelli horizontal!
Reference: 87181000
Ideal in case of breakage, loss or worn thread of your old nut.
Reference: usinage_culasse_sur_mesure
Custom machining of a cylinder head.
Reference: 12512972
Reinforced and treated high-end stud for high engine BIDALOT Racing FACTORY.
Reference: 311.0112
POLINI bolt connection for Minarelli or Piaggio and many other models.
Reference: 0716344
The shim necessary for crankshafts 85mm long connecting rod on horizontal minarelli!
Reference: 87172000
Ideal in case of breakage, loss or worn thread of your old nut.
Reference: X4 12512042
Reinforced and elongated nuts to better tighten the cylinder head and more precisely. They can withstand much higher tightening torques!