Reference: LP.01.125
Slats valves competition ITALKIT Karbonit double V for motorcycle & karting 2-stroke ROTAX, APRILIA RS ... 125cc
Ideal for refurbishing your double V 8-slat valve box ITALKIT! Black treated fiberglass slats "Karbonit".
Banner
Here is a high performance admission kit from ITALKIT (official GILARDONI) for your ROTAX engines fitted to the ARILIA RS 125cc or the KARTING engine ROTAX!
As usual, ITALKIT has released a heavy price. Perfectly adapted to a carburation of 30 to 36mm with a male carburettor (reentrant) in fixing diameter 40 to 44mm! This kit has a valve box in 8 slats (V FORCE way), a molded aluminum diffuser and a Ø36mm bent inlet pipe perfectly adapted to the all rubber viton to avoid emulsions in erasing the engine vibrations at best not to transmit them to the carburetor!
The box has special fiberglass slats called black KARBONIT with a thickness designed to prioritize power without losing torque with the system 8 slats (4 interiors and 4 exterior) said double V. The valve box is it also adhered to the viton rubber to allow perfect sealing of the slats and a soft closing of the slats repelling their wear!
Everything is obviously removable and the intake pipe as slats are separated! This very complete kit comes with a crankcase seal against valve box! A very good performance gain in low and high speed baths is achieved thanks to this complete box with intake pipe!
Technical characteristics :
- 8 slats system (4 inside and 4 outside) in Karbonit fiberglass.
- Intake pipe Ø36mm maximum and carburettor fixing Ø40 to 44mm.
- Mounting on karting and motorcycle 125cc 2T ROTAX (APRILIA RS ...)
- Inlet intake pipe (also available in straight version, 90 ° angle)
This admission kit is also available with a straight pipe with a 90 ° angle, by clicking here.
Reference: LP.01.125
Ideal for refurbishing your double V 8-slat valve box ITALKIT! Black treated fiberglass slats "Karbonit".
Reference: 27 7366.C0
MALOSSI Carbon Cutting Boards available in 0.30, 0.35 and 0.40mm. Top of the line. For manufacturing slats on a 2-stroke engine, thicknesses to choose from!
Reference: LP.26.3
Ideal for refurbishing by increasing the performance of your sporty 125cc 2T!
Reference: BOY603
An ideal way to gain torque and high revs on your 125cc motorcycle!
Reference: LC.26.3
Valves with special high performance Karbonit slats at a very reasonable price!
Reference: 27 7366.K0
Two 100X100mm boards in Karbonit MALOSSI available in 0.30, 0.35 and 0.40mm. It can be cut and therefore adapts to all 2-stroke motor vehicles. Choice of thickness.
Reference: LC.01.126.1
A high performance valve box + straight intake pipe (90 ° angle) kit for your ROTAX 125cc motorcycle or karting! Model with high-end genuine carbon slats.
Reference: 213.0599
Planks for manufacturing POLINI carbon valve slats, certified high quality! Available in 0.25, 0.28, 0.30, 0.33, 0.35, 0.40 and 0.45mm. For all 2-stroke engines, choice of thickness!
Reference: BOY605
For a gain in power both in terms of torque and at high speed!
Reference: LP.01.125
Ideal for refurbishing your double V 8-slat valve box ITALKIT! Black treated fiberglass slats "Karbonit".
Reference: LP.01.125.1
Ideal for refurbishing your double V 8-slat valve box ITALKIT! High-end carbon fiber slats.
Reference: BOY703
To increase the power and torque of your bike!
Reference: LC.26.40
Top-of-the-range Made In Italy competition valves with 0.28mm carbon blades, special high performance with gas channel.
Reference: LP.68.2
Top to refurbish your old machine 2 times by increasing its performance!
Reference: BOY602
Fiberglass competition flap covers for power gain in both torque and high speed.
Reference: LC.01.125.1
A high performance valve box + elbow intake pipe kit for your ROTAX 125cc motorcycle or karting! Model with top-of-the-range genuine carbon slats.
Reference: LC.26.4
High-end valves with carbon blades, special high performance and competition.