Reference: 206.0142
Chrome steel segment Ø64X1,2mm for POLINI 165cc kit on 125cc CAGIVA ALETTA ROSSA, DAKAR, ELEFANT and other 2 times
To be changed at the slightest loss of compression, generally within 5000 to 6000km!
Banner
Piston bi-segment Ø64mm POLINI, for kit 165cc on CAGIVA MITO, PLANET, RAPTOR, FRECCIA, TAMANACO and other 2 times. We have wear sizes A / B / C and D, to be selected according to the wear of your cylinder. The piston is complete, so it contains the piston, the two high quality steel segments, the piston pin and finally the two clips in G.
Formerly delivered as presented above but the old version of the piston presented some defects, that's why a new version was made by correcting the flaws preview, POLINI took the opportunity to add a preparation on the rear skirt so to improve the sweeping and filling of the intake as well as 2 lateral grease nipples. So do not be surprised to receive the new version as in the main photo.
A: Ø63,92mm
B: Ø63.93mm
C: Ø63.94mm
D: Ø63,95mm
CAGIVA MODEL C10 and C12 (a special C9 version is available)
Reference: 206.0142
To be changed at the slightest loss of compression, generally within 5000 to 6000km!
Reference: 272.0100
Piston clips for Ø16mm axle, often used from 125cc!
Reference: 209.0133
Ideal for reassembly without risk of leakage!
Reference: S4F05400003A
Ideal for maintaining your original cylinder!
Reference: 01.2202.025
PROX piston for YAMAHA YZ 125 2T engines from 1984 to 1986
Reference: S4F056500010
A high quality spare side repair piston for your large ATHENA kits on TDR, DT, TZR ...
Reference: S4F05600002A
ATHENA forged piston in 55.94, 55.95 or 55.96mm for TZR and TDR 2T 125cc.
Reference: PI.48.540.I
VERTEX by ITALKIT replacement piston for MONTESA CAPPRA, ENDURO, COTA 123 ... 125 2T motorcycle
Reference: 01.2252.050
PROX piston for YAMAHA DT 125 2T 18G engines (cylinder with valves, air cooling).
Reference: S4C05600003A
Ideal for refurbishing your ATHENA kit and original FONTE engine on your 125cc CAGIVA motorcycles.
Reference: 01.2245.000
PROX piston for YAMAHA DT, DT X, TDR, DT R... 125 3M B ENGINE
Reference: S410485302001.A
A high quality spare piston for your big ATHENA kits on TDR, DT, TZR ...
Reference: 066602.A
High quality replacement piston kits for your ATHENA 125cc on HONDA NSR F or R liquid cooling.
Reference: PI.01.55A.VG
VERTEX / ITALKIT mono-segment piston for high original engines and ITALKIT on ROTAX 123 from ARPRILIA Extrema RS-SP.
Reference: PI.26.56A.VG
High quality piston for HONDA NS F and MTX 125 2T.
Reference: PI.60.63A.VG
The replacement piston in mono segment for the original 250cc two-cylinder, several ribs available!
Reference: PI.01.57A.VG
The replacement piston for the original 125cc single-cylinder and 250cc twin-cylinder, several ribs available!
Reference: PI.68.560.VG
The replacement piston for the original 125cc single-cylinder, several sizes available!
Reference: 001402/1.B
A high-end piston with several dimensions to choose to change every 10 000 to 15 000 km.