FRANCE EQUIPEMENT reinforced chain kit for QUAD MASAI A50 XL

Complete FRANCE EQUIPEMENT reinforced chain kit in original size so no 428, crown of 35 teeth of your choice, pinion of 13, 14, 15, 16, 17, 18, 19 and 20 teeth of your choice. Ideal for starting fresh on your MASAI 50 quad, 3 versions to choose from.

Reinforced: With a Reinforced RK 428 HZ STANDARD chain
Hyper reinforced: With a HYPER Reinforced RK 428 KRO chain
Hyper reinforced O-RING: With an RK 428 XSO HYPER Reinforced O-ring chain, therefore with seal which maintains lubrication!

The pinion and crown are cut from the best materials for optimal quality and lifespan! You should know that originally, the 50cc MASAI quads are equipped with a fairly low range chain kit (identical to the first price here), and a 17X35 final drive! You'll choose a larger sprocket or smaller ring gear for more top speed, and a smaller sprocket for more acceleration! Be careful, a longer chain kit is more difficult to remove, so plan at least an exhaust line and a sports air filter to pull out an extra sprocket tooth or two. One tooth on the pinion is approximately equivalent to 5 teeth on the crown! The best for speed is to wear a smaller crown which will also be lighter and therefore easier to carry!

Example :
If your speed in 13X32 teeth is 65 KM/H at 10,000 rpm
It will be: 72KM/H in 14X32 teeth at 10,000 rpm
It will be: 79KM/H in 13X28 teeth at 10,000rpm
It will be: 80 KM/H in 15X32 teeth at 10,000 rpm
It will be: 88KM/H in 14X28 teeth at 10,000rpm
It will be: 88KM/H in 16X32 teeth at 10,000 rpm

It will be: 95KM/H in 17X32 teeth at 10,000rpm

It will be: 96KM/H in 15X28 teeth at 10,000 rpm

It will be: 103KM/H in 18X32 teeth at 10,000rpm

It will be: 105KM/H in 16X28 teeth at 10,000rpm

It will be: 111KM/H in 19X32 teeth at 10,000rpm

It will be: 114KM/H in 17X28 teeth at 10,000rpm

It will be: 123KM/H in 18X28 teeth at 10,000rpm

It will be: 132KM/H in 19X28 teeth at 10,000rpm

....

The longer you want to pull a chain kit, the more power you will need! To fire a 15/28, you need at least one exhaust, powerful 70cc kit, 21mm carburetor, sports variator (set to fire around 10,000 revs), racing valves... To fire more (a 17/28 for example), a long stroke crankshaft with a very powerful kit is recommended!

Mounts on QUAD MASAI 50cc A50XL, A 50 XL...

Check the shape of your crown compared to the photo before purchasing!!! Fixing the crown with 4 screws and central diameter 44mm!!