Reference: 483461
Cylinder - Cylinder without piston 50cc Ø40mm cast CGN (axis of 10mm) minarelli horizontal liquid (nitro, aerox ...)
The kit kind cheapest origin of the market, ideal for travel every day, small price to appointments.
Banner
A more torquey kit than the original while being as reliable which will allow you to drive every day without spending astronomical sums in a cylinder. Ideal in case of starting or tightening your old engine.
Here is the very last born of the house FURYTECH RACING for horizontal liquid minarelli motor scooter (nitro, aerox, ...). This is the RS10 PRO (standard not carbon). This cylinder combines several nice parameters! Performance / homologation / low price and finally design (aesthetic).
With its diameter of Ø40.20mm, this kit respects the limit cylinder in France of 50cc. The performances are still present, the intake diagrams have been greatly increased, we will also recommend it with a 19 or 21mm carburetor to use it properly, the intake transfers are 5 in number.
The exhaust diagram has also been greatly increased, this exhaust remains a simple exhaust (which we also recommend on cast iron for longevity). The finish is quite good (it's still a small cast iron, we are far from the quality / finish of aluminum MALOSSI MHR TEAM or BIDALOT 50cc).
The piston is a luxury model with double segment to preserve torque and strength, this piston is also equipped with side grease nipples. The cylinder head features a hemispherical high compression polished combustion chamber. Clearly, this kit will give you a lot of high revs and power without neglecting the torque, we were even quite astonished by all of this for such a low price.
The finish is really superb. The style is very present. This specific paint will hold without problems on condition of course not to scratch it… Put it suddenly… In short, a superb cylinder.
The cast iron is of good quality, you will not have to align your crankcases or put a reinforced crankshaft (depending on your equipment with this kit).
We recommend to accompany this kit with: carburetion from 19 to 21mm, racing exhaust, preparation of the original airbox with carburetion adjustment, valves thickness 0.30mm or 0.35mm.
The pack contains:
-X1 instructions
-X1 complete joint pack
-X1 RS10 PRO cylinder
-X1 bi-segment piston
-X2 piston clips in G
-X1 reinforced piston pin
-X2 segments 40.20mm
-X1 high compression cylinder head
-…
As an option we offer you a stage 1 preparation, this preparation is a modification of the channels and the exhaust port by increasing the diagrams and improving the duct, it increases the performance of the cylinder. An improvement to the piston and the bottom of the skirt is also included in this modification. Allow a little extra time for this preparation!
Reference: 483461
The kit kind cheapest origin of the market, ideal for travel every day, small price to appointments.
Reference: KT00094
This small high engine without cylinder head is ideal to refurbish its NITRO, AEROX ... preserving very good fastness!
Reference: EQ-723
An original type kit that will allow you to ride every day without spending astronomical sums in a cylinder. Ideal in case of starting or tightening your old engine.
Reference: 251526
A high engine cylinder head without cheap for your nitro, aerox, jog ... engine minarelli horizontal liquid scooter.
Reference: 31 8556
A high complete 50cc cast iron engine of very high quality for your nitro, aerox, ...
Reference: 01071140
An excellent compromise between torque, power and longevity. With a price defying all competitions.
Reference: 129.0604/C
A kit more torque than the original while also being reliable that allow guests to ride all day without spending astronomical sums in a cylinder. Ideal if primer or tightening your old engine.
Reference: 030307
A kit has very low prices, strong, ideal to get your nitro, jog, aerox ... Anew!
Reference: H02073840
A very solid cast iron original type kit.
Reference: 031000F
A little more efficient than the original types such as the TNT ORIGINAL or TEKNIX, this small high engine without cylinder head is ideal for refurbishing its NITRO, AEROX... By having a small power gain!
Reference: 073700
A very powerful kit and very solid! High quality.
Reference: 032050
A high aluminum engine with exhaust and cylinder head high compression booster with a totally ridiculous price!
Reference: 129.0612
Just below the GT RS10, RS10 the NIKASIL PRO is a high performance aluminum kit with torque / power ratio excellent.
Reference: EQ-767
Racing version 10 transfers of BARIKIT FONTE 50cc for horizontal liquid engine!
Reference: 166.0094
The famous 50cc cast iron kit from POLINI, finishing, use of high quality materials and guaranteed performance!
Reference: 3111511
The famous TEAM of MALOSSI MHR in 50cc ... What to say ... Nothing has that it is more to present and that it is a monster of power!