- -8%
Reference: 36 6941
Clips, MALOSSI type G piston pin rings for Ø10mm pin 0.8mm material
Ideal for the refurbishment of your engine!
Banner
Here is the small 50cc aluminum kit from MALOSSI, at a very good price, this high complete engine will allow you to start afresh with power and solidity, in relation to an origin, diagrams, lights, channels, room volume. .. are improved!
Ideal with a pot, 17.5 carburetor and racing variator.
The pack contains:
X2 piston clips
X1 segment
X1 piston Ø40mm
X1 piston pin 10mm
X1 Ø40mm cast iron cylinder
X1 high engine gasket set
...
As an option we offer a stage 1 preparation, this preparation is a modification of the exhaust port by increasing the diagrams and improving the duct, it increases the performance of the cylinder. An improvement to the bottom of the skirt is also included in this modification. Allow a little extra time for this preparation!
Mounts on:
APRILIA APRILIA SR 50 2T 1994->
If the CRANKSHAFT has the Ø 12 AXLE, MOUNT the PISTON 34 8544
APRILIA APRILIA RALLY 50 2T (MINARELLI)
If the CRANKSHAFT has the Ø 12 AXLE, MOUNT the PISTON 34 8544
APRILIA APRILIA SCARABEO 50 2T (MINARELLI)
If the CRANKSHAFT has the Ø 12 AXLE, MOUNT the PISTON 34 8544
APRILIA APRILIA SONIC 50 2T
If the CRANKSHAFT has the Ø 12 AXLE, MOUNT the PISTON 34 8544
APRILIA APRILIA SR WWW 50 2T
If the CRANKSHAFT has the Ø 12 AXLE, MOUNT the PISTON 34 8544
AEON MOTOR AEON MOTOR COBRA 50 2T (AT70)
If the CRANKSHAFT has the Ø 12 AXLE, MOUNT the PISTON 34 8544
BETA BETA ARK 50 2T
If the CRANKSHAFT has the Ø 12 AXLE, MOUNT the PISTON 34 8544
BETA BETA QUADRA 50 2T
If the CRANKSHAFT has the Ø 12 AXLE, MOUNT the PISTON 34 8544
BENELLI BENELLI 491 GT 50 2T (MINARELLI)
If the CRANKSHAFT has the Ø 12 AXLE, MOUNT the PISTON 34 8544
BENELLI BENELLI K2 50 2T
If the CRANKSHAFT has the Ø 12 AXLE, MOUNT the PISTON 34 8544
BENELLI BENELLI NAKED 50 2T
If the CRANKSHAFT has the Ø 12 AXLE, MOUNT the PISTON 34 8544
BSV BSV AX 50
If the CRANKSHAFT has the Ø 12 AXLE, MOUNT the PISTON 34 8544
BSV BSV GZ 50
If the CRANKSHAFT has the Ø 12 AXLE, MOUNT the PISTON 34 8544
CPI CPI HUSSAR 50 2T <-2002 (50 C)
CPI CPI OLIVER 50 2T <-2002 (50 C)
CPI CPI POPCORN 50 2T <-2002 (50 C)
MALAGUTI MALAGUTI F10 50 2T
If the CRANKSHAFT has the Ø 12 AXLE, MOUNT the PISTON 34 8544
MALAGUTI MALAGUTI F12-PHANTOM 50 2T
If the CRANKSHAFT has the Ø 12 AXLE, MOUNT the PISTON 34 8544
MALAGUTI MALAGUTI YESTERDAY 50 2T
If the CRANKSHAFT has the Ø 12 AXLE, MOUNT the PISTON 34 8544
MBK MBK EVOLIS 50 2T
If the CRANKSHAFT has the Ø 12 AXLE, MOUNT the PISTON 34 8544
MBK MBK FIZZ 50 2T
If the CRANKSHAFT has the Ø 12 AXLE, MOUNT the PISTON 34 8544
MBK MBK FLIPPER 50 2T
If the CRANKSHAFT has the Ø 12 AXLE, MOUNT the PISTON 34 8544
MBK MBK FORTE 50 2T
If the CRANKSHAFT has the Ø 12 AXLE, MOUNT the PISTON 34 8544
MBK MBK HOT CHAMP 50 2T
If the CRANKSHAFT has the Ø 12 AXLE, MOUNT the PISTON 34 8544
MBK MBK MACH G 50 2T
If the CRANKSHAFT has the Ø 12 AXLE, MOUNT the PISTON 34 8544
MBK MBK OVETTO 50 2T
If the CRANKSHAFT has the Ø 12 AXLE, MOUNT the PISTON 34 8544
MBK MBK SORRISO 50 2T 1996->
If the CRANKSHAFT has the Ø 12 AXLE, MOUNT the PISTON 34 8544
MOTRON MOTRON SYNCRO 50
If the CRANKSHAFT has the Ø 12 AXLE, MOUNT the PISTON 34 8544
MOTRON MOTRON THUNDER'S 50
If the CRANKSHAFT has the Ø 12 AXLE, MOUNT the PISTON 34 8544
YAMAHA YAMAHA AXIS 50 2T
If the CRANKSHAFT has the Ø 12 AXLE, MOUNT the PISTON 34 8544
YAMAHA YAMAHA BREEZE 50 2T
If the CRANKSHAFT has the Ø 12 AXLE, MOUNT the PISTON 34 8544
YAMAHA YAMAHA JOG ER 50 2S
If the CRANKSHAFT has the Ø 12 AXLE, MOUNT the PISTON 34 8544
YAMAHA YAMAHA JOG 50 2T
If the CRANKSHAFT has the Ø 12 AXLE, MOUNT the PISTON 34 8544
YAMAHA YAMAHA JOG R 50 2S
If the CRANKSHAFT has the Ø 12 AXLE, MOUNT the PISTON 34 8544
YAMAHA YAMAHA JOG Z 50 2T
If the CRANKSHAFT has the Ø 12 AXLE, MOUNT the PISTON 34 8544
YAMAHA YAMAHA NEO'S 50 2T
If the CRANKSHAFT has the Ø 12 AXLE, MOUNT the PISTON 34 8544
YAMAHA YAMAHA VINO 50 2T
If the CRANKSHAFT has the Ø 12 AXLE, MOUNT the PISTON 34 8544
YAMAHA YAMAHA WHY 50 2T
If the CRANKSHAFT has the Ø 12 AXLE, MOUNT the PISTON 34 8544
YAMAHA YAMAHA ZEST 50 2T
If the CRANKSHAFT has the Ø 12 AXLE, MOUNT the PISTON 34 8544
Reference: 36 6941
Ideal for the refurbishment of your engine!
Reference: 34 8542.A0
The replacement piston MHR for your MHR 50cc mono-segment kits minarelli vertical or horizontal scooter.
Reference: 11 7569
Replacement Gasket Pack essential for the assembly of your high engine!
Reference: 38 9782
A well-worked head that allows a good performance gain compared to the original.
Reference: 032002
An original type kit somewhat more effective with a quality / price unbeatable.
Reference: 01130940
A more powerful kit that originally affordable price.
Reference: 166.0096/10
Performance of a MHR TEAM at a very low price !!!!
Reference: 02130940
A high engine more powerful than the origin at an affordable price. Sold without cylinder head.
Reference: 030305
One of the cheapest in the market, ideal for repairing a high motor, the cylinder head is not damaged!
Reference: 166.0093
A very good little sports cast that respects the legal capacity of 50cc!
Reference: 129.0613
A robust and powerful kit with a worked look for a cheap price.
Reference: 214689
A kit without strong and powerful head, moved smoothly with the original cylinder head.
Reference: 01131540
More efficient cylinder than the original but just as strong!
Reference: 482033
The cast iron cylinder kind cheapest origin of the market, ideal for travel every day, small price guaranteed.
Reference: 071700/1
A robust kit with breathtaking performance for a ridiculous price.
Reference: 4108
Cylinder a little more powerful and solid than the origin! Can be mounted with the original cylinder head.
Reference: H02138340
Ideal for a kit of very good quality with better performance than the original without time to pay dearly.
Reference: KT00095
A kit without strong and powerful head, moved smoothly with the original cylinder head.
Reference: 251416
An original kit that will allow you to ride every day without spending astronomical sums in a cylinder. Ideal when starting or tightening your old engine.
Reference: 071700
Solid performance and kit! Can be mounted with the original cylinder head.