Reference: 13 6110B
flexible sleeve MALOSSI for carburettor PHBG Label
Specific carburettor kits sleeve labels the group MALOSSI on PEUGEOT 103, no mounting on other applications if desired!
Banner
Here is the DOPPLER sleeve for carburetor / intake pipe. It is normally specially provided for MBK Booster, YAMAHA Bw's, PEUGEOT Buxy, APRILIA Sr50 and MALLAGUTTI F10, F12 but can be used on many other machines. This sleeve is flexible and is of very good quality and comes with its 2 clamps.
Feature:
Carburetor side: Ø24 to 25mm with an anti-slip lip.
Intake side: Ø25 to 27mm with an anti-slip lip.
Total length: 32mm .
Reference: 13 6110B
Specific carburettor kits sleeve labels the group MALOSSI on PEUGEOT 103, no mounting on other applications if desired!
Reference: 215.0448
Connecting sleeve of the adjustable intake pipe POLINI carburettor 19 to 24mm (fixation Ø28,5mm) (MINARELLI SCOOTER engine, AM6, DERBI ...).
Reference: 223.0123
Specifically designed to mount CP POLINI carburettors, can also be mounted on others!
Reference: 13300118
BIDALOT flexible sleeve for carburettor PHBG.
Reference: 440161
A quality sleeve that absorbs vibration very well for a better arrival of gases.
Reference: 1311128B
Specially designed to mount flexible mounting PHBGs on a pipe intended for a rigid PHBG.
Reference: 13 4814B
An ideal carburetor / pipe connecting sleeve for large carburetors such as PHBH, PHBL, TM, ...
Reference: 293370
A quality sleeve that absorbs vibrations very well for better gas flow.
Reference: 10873
A good quality sleeve, ideal for mounting carburetors PHBG flexible up to 21mm on aluminum pipes provided for this purpose.
Reference: 13 4929B
Flexible upscale sleeve Ø35mm fixing each side! Special carburetor and big thrust configuration!
Reference: 144.480.001
Specially designed to fit PWK or KEIHIN carburettors, can also be mounted on others!
Reference: GOM-04
Quality flexible sleeve, Ø35 fixing at 37mm on each side!
Reference: 215.0444
Connecting sleeve of the adjustable intake pipe POLINI carburettor 26 to 28mm (fixing Ø30 to 34mm) ( PIAGGIO and MINARELLI SCOOTER engine).
Reference: 223.0124
Specially designed to mount CP POLINI carburettors, can also be mounted on others like the PHBG!
Reference: 215.0443
Connecting sleeve of the adjustable intake pipe POLINI carburettor 26 to 30mm (fixing Ø35 to 39mm) ( PIAGGIO SCOOTER engine).
Reference: 1314516B
Connecting sleeve for the MALOSSI adjustable intake pipe carburettor 15 to 21mm (fixing Ø23 to 25mm) ( PIAGGIO SCOOTER engine).