Reference: SIL-001
Silencer, cartridge BRK competition Competition 3 holes between axis 40mm for Derbi, minarelli am6
The replacement muffler with carbon casing to exhaust BARIKIT BRK Competition in low passage.
Banner
This exhaust is completely unbridled, reserved exclusively for competition on the circuit, runs... with a high engine 80cc and more in long stroke 45 and 46mm with large diameter 50 to 55mm.
Ideal to accompany a configuration prepared with 90 to 100cc hyper racing kit and to release the performance of your engine. This BARIKIT exhaust from the BRK Competition range will be perfect for this use. It makes it possible to exploit even more high speeds thanks to its architecture and its volumes revised upwards in comparison to its little brother made for 70cc kits.
In fine rolled welded jail, its resonance is always excellent. As for the finish, it is smooth and clean. The welds are of quality and stamped to avoid being in relief. Unvarnished finish with a laser-cut and BRK-engraved aluminum plate, it has no flange at the inlet, internally or at the outlet. It is an exhaust exclusively intended for competition on the circuit, run... .
Its silencer is still the carbon model, small black angled outlet, excellent finish, smooth and very successful. In terms of aesthetics, it brings a real visual asset thanks to the materials used, the finish, its bulky body, the carbon silencer... . Delivered complete as presented with silencer gasket, silencer fixing nut, two removable head springs 78mm long, reduction ring 28 to 25mm, silencer collar, spacer, sticker.
Installs on mécaboite MINARELLI AM6 "supermotard" engine, ideally with a motor mounted in 45mm or 46mm stroke in large diameter 50 to 55mm.
Reference: SIL-001
The replacement muffler with carbon casing to exhaust BARIKIT BRK Competition in low passage.
Reference: ESC-04
A high exhaust-end performance guarantees! Ideal with a configuration with 70cc.
Reference: H10008
High performance and light and sporty exhaust for APRILIA RS 50 2T before 1999 with single swing arm (like the CHESTERFIELD)
Reference: ESC-05
An exhaust of competition at the guaranteed performance! Piece high ideal range to accompany a prepared engine configuration.
Reference: 3212222
The famous muffler MALOSSI MHR GP 80 for your sport APRILIA RS 50cc minarelli am6. High quality, reserved only for large engine configuration!
Reference: 40253
A rare pot studied for competition for very advanced engines!
Reference: H10008-2S
Double output pot for APRILAI RS motorcycle before 1999 (chesterfield, single-sided swingarm ...)
Reference: P400010120003
A very good muffler RACING rare for your APRILIA RS, minarelli am6!
Reference: 479485
A powerful exhaust and offering a nice aesthetic to your 50 box.
Reference: 3212223
A muffler absolutely sublime for your big high-performance 80cc configuration RIEJU RS2 MATRIX PRO, nacked ...
Reference: TUB810TB
A clean exhaust, well finished which will adapt the kit 50cc to 70cc way. The Special R2 for supermotard bike in am6 and engine derbi!
Reference: 3212211
GP pot, spcial for the powerful 80cc motorbike 50cc Yamaha TZR and MBK X-POWER!
Reference: 23140
Ball joints for GIANNELLI low passage exhaust for YAMAHA TZR / MBK X-POWER from 2004
Reference: 017700K
A very nice exhaust, approved and efficient!
Reference: EC01
A very good muffler that can match very good 50cc kits like 70cc kits even in long races!
Reference: CARR10-GP
Exhaust very powerful, quite tuned to big kits 80cc powerful engine minarelli am6 (sports chassis RS, RS2, RS1, XR6 ...). Comes with adapter Ø28mm, 32mm and flange 2 screws!
Reference: 33644HF + 33645HF
A muffler designed for low passage origins engines and 50cc kit.