Reference: 157321
P2R fork gaiter for MBK 51 ... Ø30mm length 165mm
Pair of P2R fork boots on MBK 51 moped.
Banner
A black EBR RACING fork, standard adjustable in height to improve the handling and aesthetics of your PEUGEOT 103 or MBK 51! Between axis of the tees adjustable from 15 to 20.5cm. Brake block on one side only, delivered with speedometer support.
Here is the EBR RACING fork, it is delivered as in the photo, that is to say complete with the upper and lower triple clamps as well as the headlight brackets and the handlebar fixing (handlebar bridge).
This black fork can give a nice style to your PEUGEOT 103 or even MBK 51, do not hesitate to look at the technical characteristics if you are not sure of the assembly!
Above all, it has a low price! Its diameter of 30mm for the top and 35mm for the bottom except at the joints where the diameter is 43mm. It is made in Italy, it is also improved compared to the original fork for better handling and better absorption of irregularities, bumps...
It has a single brake block. It does not have a bracket to fit a disc brake caliper.
-Material: Chrome steel
-Stroke: 85mm
-Delivered with: headlight brackets, triple clamps, handlebar bridge, speedometer support...
-Diameter of the tubes: 30mm for the top and 35mm for the bottom
-Tees tube diameter: 25mm
-Height adjustable: yes
-Adjustment of the between-axis of the tees: Yes from 15 to 20.5cm
-Brake block: Yes, reversible on one side only, thickness 8mm, height 15mm
-For wheel axle: Ø12.5mm maximum
- Between axis of the tubes: 11.7cm maximum
-Total length of the tubes: 70cm at the lowest (cutting of the springs possible)
-System: standard springs
-Fixing the mudguard: Yes, 2 screws Ø6mm on each side, between axis of 18 to 50mm adjustable
-Recommended maintenance: Lubrication every 5000km, belgom chrome and fine steel wool in case of rust.
Reference: 157321
Pair of P2R fork boots on MBK 51 moped.
Reference: 171812
Fork reflector for PEUGEOT 103 screw fixing
Reference: 51974
A complete kit of PEUGEOT origin for a simple repair and at a lower cost.
Reference: 141831
Original type fork, model with aluminum sheaths & black fork crown, quality part at a good price for your MBK 51 SWING, MAGNUM, PASSION, HARD ROCK... .
Reference: 167906
Central tube / fork pivot for MOTOBECANE / MBK 88 and 85 moped
Reference: R184220110
Ideal in the event of breakage, wear, vibration... in the direction of your moped.
Reference: 509354
Set of two CGN fork nut cover caps.
Reference: 504500
Pair of dust covers for MBK 51 MAGNUM / HARDROCK / SWING ...
Reference: 141811
Low price adaptable fork for 103 MVL, CHRONO, VOGUE.
Reference: 157657
Pair of P2R fork gaiters on MBK EV 50 machines and some YAMAHA DT 50
Reference: F011290055
An excellent fork, improved in relation to the origin for a reduced price!
Reference: 151921
Dust cover for MBK 51 MAGNUM / HARDROCK / SWING fork...