Reference: 452036
TUN 'R fork protection for motorcycles, mécaboite ... chrome or carbon
Ideal for personalizing his motorcycle while protecting your fork.
Banner
A black, hydraulic EBR RACING fork in height-adjustable aluminum to improve the handling and aesthetics of your PEUGEOT 103 or MBK 51! Between axis of the tees adjustable from 15 to 20.5cm. One-sided brake block, supplied with handlebar support.
Here is the EBR RACING fork, it is delivered as in the photo, that is to say complete with the upper and lower triple clamps as well as the headlight brackets and the handlebar fixing (handlebar bridge).
This lightweight aluminum chrome fork will offer a little more than a nice style to your PEUGEOT 103 or even MBK 51, in fact it has a hydraulic dual-piston racing system allowing much better road holding than a spring fork , it will absorb bumps, holes and other road defects without difficulty while maintaining remarkable road holding.
Its price is not the lowest on the market, however the quality is there! Made in Italy, its damping stroke is 85mm, its tubes are Ø28mm in diameter all along... It has a single brake block and a bracket for installing a disc brake caliper on the left side uniquely.
Do not hesitate to look at the technical characteristics below in the description if you are not sure of the assembly! Nothing to do with all the original forks of mopeds which are spring and not oil hydraulic and which are with steel tees and tubes unlike this one which is made of aluminium!
Technical characteristics:
-Material: Aluminum & Chrome Steel
-Stroke: 85mm
-Delivered with: headlight brackets, triple clamps, handlebar bridge, screws...
- Tube diameter: 28mm
-Tees tube diameter: 25mm
-Height adjustable: yes
-Adjustment of the between-axis of the tees: Yes from 15 to 20.5cm
-Brake block: Yes, on one side only, non-reversible, thickness 8mm, height 20mm
-For wheel axle: Ø11mm maximum
- Between axis of the tubes: 12.2cm
-Total length of the outer tubes: 37cm
-Hydraulic system
-Fixing the mudguard: Yes, 2 screws Ø6mm on each side, between axis of 18mm for 2 screws
- Caliper mounting brackets: center distance 60mm, mounting hole diameter Ø8mm, mounting hole thickness 14mm for the bottom and 19.5mm for the top.
- Fork oil drain: 2 wool screws at the base of each sleeve.
-Recommended maintenance: Fork oil every 10 to 20,000 km, Belgom chrome, aluminum and fine steel wool in case of rust.
Reference: 452036
Ideal for personalizing his motorcycle while protecting your fork.
Reference: 759417
An original PEUGEOT which can be handy for a repair to a single shot.
Reference: 856118
An original washers by PEUGEOT, ideal for a lower cost to repair.
Reference: 934
A top anti-oil emulsion range and anti-friction, the more it offers excellent temperature stability.
Reference: 1139
A high-end competition, anti-emulsion and anti-friction oil. Specially studied for the competition, it offers excellent stability in temperature.
Reference: 480420
A complete original type kit for simple and inexpensive repair.
Reference: 158067
Pair of P2R fork gaiters on MBK 51 moped.
Reference: 147632
A low-cost fork body for refurbishing your MOTOBECANE 88 fork.
Reference: F011290005N
An ideal fork to improve the aesthetics and handling of your CIAO, if you don't like the spring style, no problem, they rise to give a more elegant and sober style.
Reference: 183446
Ideal if cracked or rollover your old case.
Reference: S2126
A chrome fork at low prices for your PEUGEOT 103 SPX, RC X, CLIP, MVX...
Reference: 159669
A low-cost fork body for refurbishing your PEUGEOT FOX fork.
Reference: 167906
Central tube / fork pivot for MOTOBECANE / MBK 88 and 85 moped
Reference: 158046
Pair of dust covers for MBK fork or MOTOBECANE 88, 881 ...
Reference: 479170
Some remaining units only! 103 MVL chrome fork cover
Reference: F011290071
A chrome EBR RACING fork, standard non-adjustable in height to improve the handling and the aesthetics of your PEUGEOT 103 vogue and MVL!
Reference: 25320100
Ideal for giving new life to your fork.
Reference: 141833
Fork dip tubes/sleeves for your MBK 51, 41, 40, 50, 88, 85...
Reference: F011290080
A chrome EBR RACING fork, adjustable in height to improve road holding and the aesthetics of your PEUGEOT 103 or MBK 51! Between axis of the tees adjustable from 15 to 20.5cm. Brake locks on both sides.
Reference: 509354
Set of two CGN fork nut cover caps.