Reference: EMB01
Clutch (discs, spacers, springs) reinforced MVT Racing 5 filled discs for minarelli am6
A reinforced clutch which will allow you a more frank grip and a slower wear. Ideal to accompany a 50cc push or 70cc kit.
Banner
Excellent quality, under the TOP PERFORMANCES brand. This Racing clutch kit includes all the accessories presented, in other words the nut, the reinforced springs, the reinforced discs with spacers and the red pressure flange.
Use of a coated disc, a steel disc and an additional spring compared to the origin.
Thanks to the use of 5 springs, we obtain a better distribution of the pressure. The pressure flange and the pusher are made of aluminum alloy with a specific heat treatment to optimize cooling during friction and avoid the risk of overheating and therefore better heat dissipation.
The pressure flange is anodized in red color, its thickness is 40 microns, and the surface hardness is more than 500 HV , the surface of the friction material has also been increased by 25%.
In other words, with all these developments, we are aiming for performance and longevity on this Racing clutch kit from TOP PERFROMANCES!
A true concentrate of technology, competition parts that do not require any modifications during assembly on your mécaboite Minarelli AM6 engine because they can be installed without any problem in place of the original parts.
Mounts on:
Any MINARELLI AM6 ...
As a reminder :
- The oil used must be 10W30 special for gearbox with an oil bath clutch, between 0.75 and 0.85L.
- The gearbox drain screw of the minarelli am6 engine is tightened to a torque of 1.8mdaN
- The transmission cover screws are tightened to a torque of 1.1 mdaN
- The lock nut of the pressure plate to a torque of 2.7 mdaN
- The 4 pressure plate screws (clutch springs) to a torque of 0.5 mdaN
- The clutch nut with the washer which folds up and the crankshaft nut which maintains the 2 pinions to a torque of 7.5 mdaN.
Reference: EMB01
A reinforced clutch which will allow you a more frank grip and a slower wear. Ideal to accompany a 50cc push or 70cc kit.
Reference: 99CFAMA10
Clutch housing machined mass and removable for easy access to the clutch.
Reference: 32410343
Harder springs than the original to prevent your clutch from slipping. These springs are often used in competition.
Reference: 164407
A cheap and good quality original type cable.
Reference: 9931900
An improved complete clutch kit for mécaboite moteur minarelli am6.
Reference: 32164
A good quality original type casing for your mécaboite minarelli am6. Ideal for refurbishment!
Reference: 458203
Good quality and original type, much cheaper than in concession.
Reference: 290328
A cable of good quality identical to the origin at lower cost.
Reference: 9921180
A reinforced TPR clutch based on Kevlar cellulose for the engine of your minarelli am6.
Reference: AP8206617
Essential element for the proper functioning of the clutch!
Reference: 9050820X0400
An essential spring on your minarelli AM6 engine.
Reference: VCR-RD19188.SP
Racing springs to avoid having a slipping clutch, VOCA quality guaranteed.
Reference: 287410A
A very good quality clutch which will allow you to have a more frank grip and for an unbeatable price.
Reference: P400130309001
A high quality housing made by ATHENA RACING for your mécaboite moteur minarelli am6.
Reference: 9920580
Ideal for strengthening your clutch! Competition springs for minarelli am6 engine.
Reference: S 1715/B
A clutch trimmed original type strengthened. Ideal for small configuration.