Reference: RST.350
ITALKIT COMPETITION needle cage reinforced Ø14X18X20mm
A special competition needle cage, silver treated from ITALKIT in Ø14X18X20mm.
Banner
Here is the DOPPLER needle cage, it is a truly specific product and quite unusual, indeed DOPPLER is the only manufacturer to still offer needle cages with specific clearances. This cage is of very high quality, ultra reinforced and with improved lubrication. Size Ø10mm by Ø14mm by length 13mm.
The Clearance must be selected according to the forcing on the piston pin but also according to the engine speed! Generally, with the example of a crankshaft bearing, we will take a cage with very little play for an engine which takes low revs because it does not require big freedom! However, on a very high rev engine , if the cage has very little play, at very high speed it may enter into seizing / overheating phenomenon and risk of yielding in addition to slightly restricting the engine speed.
-Game from 0 to -2 (low and medium engine generally 0 to 8500 rpm max)
-Game from -2 to -4 (low and medium engine speed generally 8,500 to 10,000 rpm max)
-Game from -4 to -6 (engine low and medium speed generally 10,000 and + rpm max)
Remember to choose the desired game before adding it to the cart.
Reference: RST.350
A special competition needle cage, silver treated from ITALKIT in Ø14X18X20mm.
Reference: JP04
Reinforced needle cage, mounts on many models of crankshaft and engines!
Reference: 480794
Needle cage mounting on many models of crankshaft and engines!
Reference: RST.179
A special competition needle cage, silver treated from ITALKIT in Ø14X18X18mm.
Reference: RST.214
A special competition needle cage treated money in ITALKIT in Ø12X16X15mm.
Reference: 515655
A very solid Ø12x15x15mm cage for your scooter, moped and mécaboite at a good price!
Reference: 6612961B
Reinforced needle cage that will support large engine configurations. In addition to this, you need to know more about it.
Reference: 324278
Needle cage for many models of crankshaft and motors Diameter Ø12 X 17 X 13mm, available in 2 sets of specific adjustment.
Reference: 480795
A reinforced needle cage that will allow you to install all the engines on the market without risk of breakage.
Reference: RST.240
A special competition needle cage, silver treated from ITALKIT in Ø14X17X17mm.
Reference: CM03006
A needle cage reinforced but unlike the MALOSSI, lubrication is not improved.
Reference: 66 8102B
Silver needle cage for maximum strength and reliability
Reference: 280.0012
High quality POLINI needle cage, ideal on 70cc kit and more !!
Reference: 459124
A cage available in 2 sets of adjustment! Diameter Ø12 X 16 X 15mm for many applications.
Reference: 041212
A needle cage certainly cheap but very well reinforced.
Reference: JP03
A reinforced needle cage which will allow you to fit all the engines on the market without risk of breakage.