Reference: 496273
Reinforced bearing 6302Q C3 polyamide cage TEKNIX original size for MBK 51 / motobecane AV10 / AV7
Very good quality bearing with polyamide cage. Can handle most configuartions without problems.
Banner
Here is the reinforced and improved ITALKIT RST.325 needle cage for MOTOBECANE / MBK 51 AV10 or AV7 engine. With such a cage you will always be safe from the risk of breakage or seizing! Very high quality, we recommend changing every 5,000 to 10,000 km depending on the power and rpm of the engine. Piston pin size to install, diameter 13mm as the origin. It mounts on the original crankshafts, TEKNIX, BIDALOT, MALOSSI, PARMAKIT… Or other model. Size Ø13mm X Ø16mm X Length 14mm.
Reference: 496273
Very good quality bearing with polyamide cage. Can handle most configuartions without problems.
Reference: rrd_cage_51
High performance RRD needle cage for your moped.
Reference: 19 1910B
To have a variator that slides as well as possible.
Reference: 8675
Reinforced needle cage with improved lubrication.
Reference: 152296
Very good quality bearing with steel cage. Can handle most configuartions without problems.
Reference: 66 3276B
The best needle cage for your engine.
Reference: 481763
Ideal in case of loss or replacement of a worn nut! Can also be mounted on crankshafts not to the right of MBK 51, ignition side.
Reference: 324244
Here is the only competition needle cage to be offered with specific sizes for your crankshaft.
Reference: 506270
Ignition rotor nut 11x100mm not to the right for MBK 51 moped.
Reference: 4497
Reinforced needle cage with improved lubrication.
Reference: 489602
Spare part essential in case of loss, wear ... of your old nut!
Reference: 4763
Ideal in case of breakage or wear for a good quality and safe reassembly.
Reference: 4143
Quality product at an excellent price.
Reference: 323821
Premium pack that can withstand any big setup.
Reference: 505184
Set of two bearings + oil seals for low engine MBK 51 / AV10 / AV7