Reference: 280.0030
2 reinforced bearings SKF riveted steel cage original size POLINI for MBK 51 / motobecane AV10 / AV7
Anti-vibration reinforced competition bearing.
Banner
Set of two original size TPI bearings, brand with good quality / price ratio, reinforced riveted steel cage. Bearing clearance: C3. Suitable for original or very prepared configurations (not exceeding 13,500 / 14,000 rpm which will require C4). Delivered with a set of good quality lip seal! Mounts on MOTOBECANE AV10 / AV7 / MBK 51 all models. Proposed by the French CGN.
Reference: 280.0030
Anti-vibration reinforced competition bearing.
Reference: 541050O
A very practical tool to remove the bearings more easily from your crankshaft or other.
Reference: 506270
Ignition rotor nut 11x100mm not to the right for MBK 51 moped.
Reference: 7964
High-end bearing with steel cage. Can support any configuration without problem.
Reference: 167982
Reinforced needle cage with improved lubrication.
Reference: 516947
For a much more resistant and waterproof, more reliable and easier refurbishment.
Reference: rrd_cage_51
High performance RRD needle cage for your moped.
Reference: 19 1910B
To have a variator that slides as well as possible.
Reference: 505184
Set of two bearings + oil seals for low engine MBK 51 / AV10 / AV7
Reference: 480974
Excellent in case of wear of your old nut.
Reference: 481763
Ideal in case of loss or replacement of a worn nut! Can also be mounted on crankshafts not to the right of MBK 51, ignition side.
Reference: 324244
Here is the only competition needle cage to be offered with specific sizes for your crankshaft.
Reference: 285.0110
High-end spinnaker seals for MBK 51.
Reference: 8675
Reinforced needle cage with improved lubrication.
Reference: 489602
Spare part essential in case of loss, wear ... of your old nut!