Reference: 490405
TEKNIX single layer air filter foam 33X66cm (to cut)
Cut out teknix air filter foam, size 33X66cm / thickness 10mm uncompressed.
Banner
To prepare your scooter, it is sometimes enough to simply prepare its original air box. Indeed, it will be much less noisy than a horn and take less water, dust and other foreign objects .... And above all you will have a big reserve of air. Thanks to this CGN foam, you can take more air and more performance.
Remember to review your carburetor settings after mounting this filter. To prepare an airbox and get more performance, the most appropriate solution is to install a racing foam, and to reopen the air inlet (we generally recommend an increased entry, you can add a grid with screws of fixing to prevent something from falling into the box).
You will find by clicking here the cleaning spray and oils for air filter.
Mounts on:
PEUGEOT BUXY 50 2T
PEUGEOT ELYSEO 50 2T
PEUGEOT FORCE JET TSDI 50 2T LC (HL 1)
PEUGEOT FORCE JET C-TECH 50 2T LC
PEUGEOT LOOXOR 50 2T
PEUGEOT LUDIX 50 2T
PEUGEOT LUDIX BLASTER 50 2T LC (HL 2)
PEUGEOT METAL-X 50 2T
PEUGEOT BUXY RS 50 2T
PEUGEOT SPEEDFIGHT 2 50 2T LC 2004
PEUGEOT SPEEDFIGHT 3 50 2T (B1E 40 QMB)
PEUGEOT SPEEDFIGHT 50 2T
PEUGEOT SPEEDFIGHT 50 2T LC
PEUGEOT SPEEDAKE 50 2T
PEUGEOT SQUAB 50 2T
PEUGEOT TREKKER 50 2T
PEUGEOT VIVACITY 50 2T
PEUGEOT VIVACITY COMPACT 50 2T (FB2FP)
PEUGEOT X-FIGHT 50 2T
PEUGEOT X-FIGHT 2 50 2T LC 2004
PEUGEOT X-FIGHT 50 2T LC
And other models ...
Reference: 490405
Cut out teknix air filter foam, size 33X66cm / thickness 10mm uncompressed.
Reference: 09814_00
A tulip which increases the venturi effect and therefore the efficiency of your engine. In addition to this, you need to know more about it.
Reference: 203.0147
An air filter with a large reserve of air for optimal breathing of your engine!
Reference: 928.465.004
Ideal for modifying, increasing or reducing your air intake on the POLINI large volume gearbox!
Reference: 485245
Very good quality for the maintenance or preparation of your original air box on PEUGEOT scooter.
Reference: 0413434
A competition filter with expanded foam that allows a large volume of air and therefore better recovery and performance.
Reference: 99200.32
A stylish air box that will give a look to run your machine. Moreover, it allows a much better engine breathing it out to Labris moisture.
Reference: 485252
A 200 X 300mm foam board, ideal for cutting, as you wish, the shape of your original air filter.
Reference: 1213257B
MALOSSI rubber tulip to improve the venturi effect.
Reference: 115050
K&N green horn type air filter, angled at 45 ° but adjustable at half the elbow! A very good filter that breathes well.
Reference: 1411418
High quality single layer version, ideal for optimizing your filtration!
Reference: 203.0133
To prepare your original air box or replace a worn filter, high-end competition model!
Reference: 467817
Air filter with simple design but efficient performance.
Reference: 203.0166
A filter with a large reserve of air, special large PWK carburetor, PHBH, PHBL, POLINI CP with tulip ... and other models. Ideal for a motor prepared competition!
Reference: 203.0064
A very high-end filter that will allow you maximum performance of your engine without worrying about impurities.
Reference: 928.465.001
Large volume karting type airbox, high quality for filtration and increased air volume intake! Internal filtration with double layer POLINI foam.