Reference: 368660
DOPPLER air filter sleeve angled 45 ° fixing Ø 28mm to 35mm with collar
Spare sleeve for DOPPLER air filters, with its clamp.
Banner
Straight out of the DOPPLER catalog… Here is the karting type airbox which will be easily installed on many motorcycle / scooter / moped carburettors. With an average size of 21cm in length, 10cm in width and 11cm in height, it is classified as an average volume. Equipped with 2 suction inlets, filtered by an interior foam + protective grid and an outgoing connecting sleeve with tightening collar… This fully removable air box is top of the range!
In addition, its aesthetics are devastating! Worthy of competition gearboxes, it is available in 5 colors for an even more advanced look of your machine ... Let's talk about performance, its volume will offer you a clear improvement, especially during the recovery because it allows a better reserve of air than a simple small filter foam for example. A foam is placed vertically inside and blocked by a plastic grid thus preventing any particles, gravel, etc ... from entering the carburetor and more importantly, the engine! It will also allow you to reduce noise compared to a normal filter. Delivered complete as presented with sleeve, collar, box, maintenance instructions, ...
Technical characteristics:
Minimum fixing diameter: 28mm
Maximum fixing diameter: 35mm
Box width: 10cm
Box height: 11cm
Box length: 21cm
Available color:
Red
Blue
Grey
White
Black
Remember to select the color of your choice before ordering.
Reference: 368660
Spare sleeve for DOPPLER air filters, with its clamp.
Reference: 368674
DOPPLER spare air filter collar, sleeve DOPPLER or other applications.
Reference: 461830
Ideal in case of loss of your old room!
Reference: 9910300
An angled or straight carburetor of your choice to best suit your machine.
Reference: 203.0157
POLINI air filter foam to cut, size 21X29,7cm / thickness 19mm uncompressed.
Reference: 115085A
Air filter nice design carbon and red color without cover, for a nice design with good performance on your 2 wheels.
Reference: 04 1418
A small filter that takes up little space but allows good filtration and a good supply of air.
Reference: 10001-82
A tulip which increases the venturi effect and therefore the efficiency of your engine.
Reference: S410000200009
A competition filter with expanded foam that allows a large volume of air and therefore better recovery and performance.
Reference: 203.0036
3 diameters and 2 lengths to choose from for a high quality filter with a design reflecting the quality! Breathing and design at the top!
Reference: 518555
STAGE 6 air filter, cotton horn for DELL'ORTO 26/28 carburettors, MIKUNI TM24 OR TYPE PWK (stage 6) Ø44 to 49mm
Reference: AP8106790
A tulip that increases the venturi effect therefore the performance of your engine.
Reference: 343.0023
Ideal for adapting your Ø34 / 35mm air filter on your POLINI CP carburetor.
Reference: 203.0150
A filter with a big reserve of air, special big PWK carburetor and other models. Ideal for a motor prepared competition!
Reference: 203.0164
Ideal to accompany a POLINI CP carburetor, high quality EVOLUTION large volume filter!
Reference: 1413965
A foam that can adapt to all air boxes for optimal air filtering.
Reference: 115200
Air filter design nice black, to remain discreet on your 2 wheels.
Reference: 440956
An air filter with a worked design with very good performance.
Reference: 04 9424.K0
MALOSSI E5 air filter with black cover. Available for PHVA, PHBN, PHBL, MIKUNI, PHVB, PHF, PHBH ...