Reference: 4YVE445310000
Hose, air box connecting sleeve, original air filter for YAMAHA / MBK X-POWER 50
Sleeve to connect the air box to the carburetor of the original YAMAHA TZR and MBK X POWER 50.
Banner
Ultralight machined aluminum horn, for threaded carburetors, available in 16 sizes shown below. Without even a protective grid at the entrance, it is therefore recommended only on a clean track.
This filter increases the performance by improving the venturi effect, however the noise developed serras increased and more castling.
Available sizes (Ø = fixing Ø and L = horn length) :
Ø32X L 33mm (DELLORTO PHBG threaded)
Ø32X L 64mm (DELLORTO PHBG threaded)
Ø35X L 36mm (MIKUNI)
Ø35X L 60mm (MIKUNI)
Ø38X L 25mm
Ø38X L 70mm
Ø39X L 70mm
Ø40X L 42mm (threaded DELLORTO PHBH, non-threaded PHBL, MIKUNI ...)
Ø42X L 40mm (DELLORTO PHBH unthreaded)
Ø42 XL 58mm (without grid and without thread)
Ø42X L 65mm (DELLORTO PHBH unthreaded)
Ø43X L 33mm (MIKUNI, without grid)
Ø48X L 20mm
Ø48X L 36mm
Ø48X L 57mm
Ø48X L 61mm
Ø50X L 61mm (DELLORTO VHST, KEIHIN PWK, MIKUNI ...)
Ø59X L 37mm (DELLORTO SHA)
Ø55X L 63mm (MIKUNI)
The information next to the sizes is only indicative, you must take the Ø of your carburetor at the level of the air filter attachment !!! You should know that an unthreaded Ø 32mm horn will be mounted on a carburetor with a fixing Ø of 31.50 to 32.50mm. A Ø52mm horn will be mounted on a carburetor with a fixing Ø of 54 to 56mm without problems!
Reference: 4YVE445310000
Sleeve to connect the air box to the carburetor of the original YAMAHA TZR and MBK X POWER 50.
Reference: 203.0147
An air filter with a large reserve of air for optimal breathing of your engine!
Reference: 343.0023
Ideal for adapting your Ø34 / 35mm air filter on your POLINI CP carburetor.
Reference: 440956
An air filter with a worked design with very good performance.
Reference: 114225
A foam board 330 X 330mm, ideal for cutting, as you like the shape of your original air filter. Made in Italy!
Reference: 114010U
MARCHALD FILTERS foam air filter for motorcycle BETA RR 50- 125CC 1997 to 2020 / CPI 50
Reference: 203.0150
A filter with a big reserve of air, special big PWK carburetor and other models. Ideal for a motor prepared competition!
Reference: 260269
TUN 'R air filter for SHA carburetor, it allows better filtration and better performance.
Reference: 492196
Original type air filter for BETA 50 from 2014.
Reference: 485252
A 200 X 300mm foam board, ideal for cutting, as you wish, the shape of your original air filter.
Reference: 0411459
A filter often used in competition for that high quality foam and are look neat / racing.
Reference: 04 2111
MALOSSI E3 air filter small but gives excellent engine breathing.
Reference: 490405
Cut out teknix air filter foam, size 33X66cm / thickness 10mm uncompressed.
Reference: S410000200006
A very high quality air filter with a fine foam for a better airflow.
Reference: 114010V
MARCHALD FILTERS foam air filter for motorcycle BETA RR 50- 125CC from 2021
Reference: 203.0159
Ideal for positioning your large volume filter thanks to the 90 ° elbow, for large PWK carburettors and other models.