Reference: 10001-82
Tulip / DELLORTO venturi improvement adapter Ø43mm threaded X Ø60mm for PHBH / PHBL
A tulip which increases the venturi effect and therefore the efficiency of your engine.
Banner
The best solution to prepare your mécaboite is sometimes to prepare your original air box. Indeed, it will be much less noisy than a horn and will take less water, dust and other foreign bodies…. And above all you will have a large reserve of air. Thanks to this ATHENA Racing foam, you will be able to take more air and therefore more performance at the carburation level. This foam is mounted in the original air box of DERBI Super-Motard, Senda, Cross, Enduro, X-trem, X-race, DRD ... and many other vehicles.
Remember to review your carburetor settings after fitting this type of filter. To prepare an air box, the most appropriate solution is to install racing foam, and reopen the air inlet (we generally recommend an inlet of 5X10cm instead of the 3 small original holes, you can add a grid with 4 screws to prevent something from falling into the box).
You will find by clicking here the cleaning sprays and oils for air filter.
Reference: 10001-82
A tulip which increases the venturi effect and therefore the efficiency of your engine.
Reference: 203.0080
A straight outlet competition air filter, high-end model with several sizes of attachment to choose from.
Reference: 10323_00
A tulip which increases the venturi effect and therefore the efficiency of your engine.
Reference: 203.0090
A competition air filter outlet bent at 30 °, high-end model with several sizes of fixing choices.
Reference: 99200.32
A stylish air box that will give a look to run your machine. Moreover, it allows a much better engine breathing it out to Labris moisture.
Reference: 115200
Air filter design nice black, to remain discreet on your 2 wheels.
Reference: 484132
Air filter foam teknix to cut, size 30X21cm.
Reference: 115050A
K & N green horn type air filter, angled at 45 ° but adjustable at half the elbow! A very good filter that breathes well.
Reference: 203.0157
POLINI air filter foam to cut, size 21X29,7cm / thickness 19mm uncompressed.
Reference: 05 1203
A filter that will improve the venturi effect therefore the performance of your engine while creating a racing sound.
Reference: 203.0095
A 90 ° angled outlet competition air filter, small top-of-the-range model with several fixing sizes to choose from.
Reference: 466739
A design air filter worked with very good performance.
Reference: 473483
Ideal for optimizing your filtration while bringing a personalized touch to your engine!
Reference: 518555
STAGE 6 air filter, cotton horn for DELL'ORTO 26/28 carburettors, MIKUNI TM24 OR TYPE PWK (stage 6) Ø44 to 49mm
Reference: 490405
Cut out teknix air filter foam, size 33X66cm / thickness 10mm uncompressed.
Reference: 04 6199
A very good tulip horn for better suction of your engine.