- -30%
Reference: 0101.02.031
Clamp screw Ø5,5 X L.8mm DOMINO decompression, starter & Accelerator (incoming head screws)
High Clamp range Ø5,5mm, 8mm length for your cable accelerator, starters ...! Model with incoming screw head.
Banner
Here are the POLINI MOTORI choke levers, this complete lever can be mounted with any machine has a cable choke carburetor. You can mount this lever on the handlebars on the frame, directly on the engine ...
Or you want it! This choke is complete, it has an actuated position, you just need to turn it ¼ turns to deactivate the choke. The starter is acronym POLINI, a nice practical accessory and racing! It is available in several colors: BLACK / ANODIZED BLUE and CHROME.
Reference: 0101.02.031
High Clamp range Ø5,5mm, 8mm length for your cable accelerator, starters ...! Model with incoming screw head.
Reference: R163620140
A complete kit which will be ideal for refurbishing your 2 wheels.
Reference: 162505
A complete kit that will be ideal for refurbishment of your 2 wheels to improve the aesthetics of your moped.
Reference: 0616
A high-end tool to lubricate your brake cables clutch / or other applications.
Reference: 8806
Reinforced cable clamp Ø5mm X L.7,8mm for cable diameter Ø2mm.
Reference: 15 0331
MALOSSI Y connection diam 6 to 13. Ideal for adding a recovery lung or other.
Reference: CAL01RRD
RRD PERFORMANCES wedge for re-orientation and adaptation of MINARELLI AM6 / DERBI valves / pipe on MOTOBECANE AV10 / MBK 51 engine with POLINI housings.
Reference: 15 0651
MALOSSI tee fitting Ø6mm and 8mm. Ideal for adding a lung or other recovery.
Reference: 8835
Reinforced cable clamp Ø6mm X L.1,3cm for Ø2,2mm diameter cable.
Reference: 460034
CGN fuel circuit cut-off to replace the valve or in the event of wear of the vacuum pump.
Reference: 480346
A good universal reinforced cable that adapts to almost any vehicle.
Reference: 162504
A complete kit that will be ideal for refurbishing your 2 wheels.
Reference: 6540
Adaptable gas cable 5x7 1m20 Peugeot 103.
Reference: 1628.86
Essential piece to get 2 cables with another directly from the throttle grip or another. Model with 41mm stroke and cable hole / shaft diameter 6,80mm. Red color.
Reference: 15 0323
MALOSSI T fitting diam. Of your choice. Ideal for adding a recovery lung or other.
Reference: 486936
Reinforced Clamp Ø6mm X L.1cm for cable diameter Ø2,5mm.