Reference: 482746
Complete universal starter on frame for carburettor, blue anodized TUN 'R
A universal cable choke control, manual action for efficient operation. Offers a nice aesthetic with its blue color!
Banner
Very practical and safe, this accessory is too often forgotten or overlooked. It allows you to replace the fuel tap if you don't have one, but not only! When you make carburettor adjustments or even a current cleaning, dismantling, you are often obliged to remove the hose from the carburettor socket, this accessory allows you to simply unclip!
Clearly when you want to remove the carburetor, you press on the stainless steel clips of the part and the hose is separated in 2! The 2 ends are also closed! It is therefore on the one hand useless to disconnect the hose, but also useless to close the fuel valve! This hose cutter is of very good quality and comes with 2 hose clips.
Reference: 482746
A universal cable choke control, manual action for efficient operation. Offers a nice aesthetic with its blue color!
Reference: 162504
A complete kit that will be ideal for refurbishing your 2 wheels.
Reference: 156261
M6 X 30mm studs that can be used for many applications.
Reference: 0101.02.199
High Clamp range Ø5,5mm, length 10mm for your cables accelerators, starters ...! Model with screw outgoing head.
Reference: CAL01RRD
RRD PERFORMANCES wedge for re-orientation and adaptation of MINARELLI AM6 / DERBI valves / pipe on MOTOBECANE AV10 / MBK 51 engine with POLINI housings.
Reference: 460034
CGN fuel circuit cut-off to replace the valve or in the event of wear of the vacuum pump.
Reference: 252738
Reinforced cable clamp Ø4mm X L.8mm for Ø1,6mm diameter cable.
Reference: 15 0323
MALOSSI T fitting diam. Of your choice. Ideal for adding a recovery lung or other.
Reference: 311.0102
POLINI connection for cooling or other filtration
Reference: 2135.86
Essential piece to get 2 cables with another directly from the throttle grip or another. Model with 36mm stroke and cable hole / duct specific 6,80mm diameter with large opening on one side. Brown color.
Reference: 0182.86
Essential piece to pull 2 cables with another directly from the throttle grip or other. Model with 36mm stroke and cable hole / sheath diameter 6.25mm Black color.
Reference: 480346
A good universal reinforced cable that adapts to almost any vehicle.
Reference: 0101.02.031
High Clamp range Ø5,5mm, 8mm length for your cable accelerator, starters ...! Model with incoming screw head.
Reference: 8806
Reinforced cable clamp Ø5mm X L.7,8mm for cable diameter Ø2mm.
Reference: 37 3640
MALOSSI cable clamp Ø5.5 X 9mm. Ideal for a secure attachment.