Reference: 0182.86
DOMINO cable breaker 36mm hole Ø6,25mm
Essential piece to pull 2 cables with another directly from the throttle grip or other. Model with 36mm stroke and cable hole / sheath diameter 6.25mm Black color.
Banner
Brand DELLORTO, here is the automatic starter with wiring for all carburettor DELLORTO PHVA and PHBN. Good, his finishing is very good for the price! Indeed, a cost that room will be ideal to refurbish your carburetion and avoid cold start problems. Plugs into the original electric beam, pod with 2 pins. Diameter of the mating portion of the starter Ø20mm, with O-ring.
Reference: 0182.86
Essential piece to pull 2 cables with another directly from the throttle grip or other. Model with 36mm stroke and cable hole / sheath diameter 6.25mm Black color.
Reference: 423800
A good quality circuit breaker at a low price.
Reference: 1068.86
Essential piece to get 2 cables with another directly from the throttle grip or another. Model with 36mm stroke and cable hole / sleeve 6,80mm diameter. Color gray.
Reference: 2135.86
Essential piece to get 2 cables with another directly from the throttle grip or another. Model with 36mm stroke and cable hole / duct specific 6,80mm diameter with large opening on one side. Brown color.
Reference: R163620130
A complete kit which will be ideal for refurbishing your 2 wheels.
Reference: 460034
CGN fuel circuit cut-off to replace the valve or in the event of wear of the vacuum pump.
Reference: 162505
A complete kit that will be ideal for refurbishment of your 2 wheels to improve the aesthetics of your moped.
Reference: 15 0651
MALOSSI tee fitting Ø6mm and 8mm. Ideal for adding a lung or other recovery.
Reference: 175695
PHBG choke lever control for good quality and cheap.
Reference: 8835
Reinforced cable clamp Ø6mm X L.1,3cm for Ø2,2mm diameter cable.
Reference: 15 0331
MALOSSI Y connection diam 6 to 13. Ideal for adding a recovery lung or other.
Reference: 252738
Reinforced cable clamp Ø4mm X L.8mm for Ø1,6mm diameter cable.
Reference: 486936
Reinforced Clamp Ø6mm X L.1cm for cable diameter Ø2,5mm.
Reference: 486932
An ultra complete kit ideal for refurbishing your accelerator, clutch.
Reference: 451421
An essential tool in a workshop to have properly greased cables.