Reference: 21 0871B
MALOSSI stainless steel clamps L. 9mm d. 30 to 45mm sleeves, filters ...
A high-end collar that allows you to tighten your tightening more without risk of breakage.
Banner
Ideal in case of breakage of your original calorstat or if you do not have one (removed by the mechanic or former owner) and you want to put one back. This TEKNIX calorstat is of good quality. On large configurations, it should generally be removed to facilitate the passage of the liquid. But winter is strongly discouraged.
The motorcycle will not heat up properly and wear may occur faster than expected! The calorstat function works like this: it closes the inlet as long as the liquid is not hot in the engine… It opens as soon as it is at the right temperature. This allows the engine to be at the right temperature and avoids having to heat the motorcycle too long.Generally, some do not recommend leaving it because it can cause problems (seizure due to wear). We recommend to leave the calorstat (except on very large configuration and again…) but to change it every 1 year or even 2 years! As the mechanical booklets advise.
Mounts on:
All mécaboites 50cc with DERBI Euro 1, 2, 3 and 4 engine
Reference: 21 0871B
A high-end collar that allows you to tighten your tightening more without risk of breakage.
Reference: 093620
A piece not to neglect especially in winter, so the engine does not wear too much to turn too cold!
Reference: 11026
A good quality necklace that can tighten your strongest clamping without risk of breakage.
Reference: AA00827
Complete repair kit for mécaboite DERBI euro 1 & 2, ideal in case of malfunction or wear of your original water pump.
Reference: 11028
A good quality necklace that can tighten your strongest clamping without risk of breakage.
Reference: 078516A
Ideal if there is a leak in the water pump on motor 1 & 2.
Reference: 880325
DERBI original temperature probe, Ø14 X 1.5mm thread.
Reference: 621119
5 liter container at an affordable price, very high quality! -18 ° C!
Reference: 11034
A good quality collar which allows you to tighten your tightenings more securely without risk of breakage.
Reference: 11031
A high-end necklace that can tighten your strongest clamping without risk of breakage.
Reference: 21 0868
A high-end collar that can tighten your tightening stronger without risk of breakage.
Reference: 11029
A good quality necklace that can tighten your tightening stronger without risk of breakage.
Reference: 5616363
New in 2014, the best water pump on the market for improved and optimized cooling with guaranteed power gain!
Reference: 21 0865
A high-end collar that can tighten your tightening stronger without risk of breakage.
Reference: 315.0028
Cooling screws for POLINI kit on PEUGEOT, MINARELLI ...
Reference: 11033
A good quality collar which allows you to tighten your tightenings more securely without risk of breakage.