Reference: 07745_00
choke lever screw "CPL" for carburettors DELLORTO VHST / PHBE / PHBL / PHBH / VHSH
Ideal in case of breakage or wear your old screws. This will prevent a complete change of your carburetor and make a repair cost.
Banner
Complete choke system but as on the picture delivered without the o-ring or the screw! It thus contains the lever, the support, the zipper, the piston, the spring, the axis ... This starter says "CPL" is mounted on many large DELLORTO carburetors such as VHST / PHBE / PHBL / PHBH & VHSH. We only sell genuine INC DELLORTO certified parts. The lever is indicated "choke".
Reference: 07745_00
Ideal in case of breakage or wear your old screws. This will prevent a complete change of your carburetor and make a repair cost.
Reference: 04957_00
Indispensable for the maintenance of your tank on carburettor DELLORTO PHSB, VHSA, VHSB, VHSC and VHSH.
Reference: 53089_00
An extra fine screw, gasket and fuel filter pack for DELLORTO VHSA, VHSB and VHSH carburettors.
Reference: 52627.77
A set of gaskets essential for the refurbishment of the sealing of your VHST carburetor.
Reference: 53036_00
Ideal in case of loss or change the passage of your cable.
Reference: 52576
Ideal for refurbishing your DELLORTO PHSB carburetor.
Reference: 16663_00
Essential part for the operation of your VHST carburetor.
Reference: 13590_00
Special tank for big VHST carburetors PHBH, PHBL ... with double floats nonstandard size. Scheduled to be held with fitting cap.
Reference: 12546_00
Essential part of your VHSA carburetor VHSB and VHSH for better mixing oil / petrol!
Reference: 263991
A complete kit that will allow you to pass your cables as you wish.
Reference: 1213257B
MALOSSI rubber tulip to improve the venturi effect.
Reference: 07745_00
Ideal in case of breakage or wear your old screws. This will prevent a complete change of your carburetor and make a repair cost.
Reference: 1263
The tension adjuster which is placed at the end of your tubes.
Reference: 13365_00
The aluminum tank with overflow, mounts on all VHSH and VHSB carburettors to remove your jets faster, drain faster and get more strength!
Reference: 09436_170
A complete needle with several sizes to choose from to adjust your flow to perfection.
Reference: 213458
A necessary part for the proper functioning of your carburetor.
Reference: 53090_00
The idle screw with spring to your VHSB carburetors and VHSH!