Banner
A high quality 50cc complete cast iron motor of very high quality for PIAGGIO / GILERA motor scooter
Here is the small 50cc cast iron kit from MALOSSI, this high complete engine will allow you to start on excellent engine base with the added bonus of performance and strength in relation to an origin.
Revised and corrected diagrams, improved channels, ... Equipped with a bi-segment piston offering torque, a high compression yoke mounted on O-ring for more pre compression and safety.
A real asset while respecting the 50cc displacement and allowing you to circulate in full compliance! We recommend to accompany with at least to exploit your kit: racing exhaust, a carburetor 17.5 / 19mm, a good variation ...
Delivered 100% complete with its cylinder head, its joints, its Ø40mm cast iron cylinder, studs of exhaust fixings, piston, segments, axis, cage with needle ...
Optionally we offer a stage 1 preparation, this preparation is a modification of the channels and exhaust light by increasing the diagrams and improving the pipe, it increases the performance of the cylinder. An improvement of the piston and skirt stocking is also included in this modification. Allow a little extra time for this preparation!
Mounts on motor PIAGGIO liquid 50cc 2 times:
APRILIA SR
ARPILIA SR R
DERBI GP1
DERBI GPI OPEN
GILERA DNA
GILERA RUNNER SP before 2005
GILERA RUNNER SP after 2006
GILERA RUNNER
PIAGGIO NRG EXTREME
PIAGGIO NRG MC2 before 1997
PIAGGIO NRG MC2 after 1998
PIAGGIO NRG
PIAGGIO NRG MC3 DD
PIAGGIO NTT
PIAGGIO NRG Power DD
PIAGGIO QUARTZ
PIAGGIO ZIP SP after 2001
PIAGGIO ZIP SP before 2000
And other models ...
Reference: 6611785B
High quality needle cage, reinforced! ideal on the most advanced configurations.
Reference: 27 7054.K0
Ideal for fine-tuning your settings and improving your performance!
Reference: 36 1806
Do not forget to change at each reassembly.
Reference: 15 9489
Essential for the proper operation of your cooling system.
Reference: 19 3298E
Set of 2 M6 studs which can be used for many applications.
Reference: 34 8538
A spare piston very good to change every 7500 km see 10,000 km.
Reference: 3515115
A pair of good quality segment to change every 5000 km.
Reference: 38 8904
Your head is deformed or the seal wears very quickly? Here is the replacement head for your kit.
Reference: 35 1981.40
Ideal for maintaining and repairing its 50cc MALOSSI cast iron kit in the event of loss of compression, heating, etc. Thickness 1.5 mm.
Reference: 11 7438
A quality seal for watertight pack your high engine liquid-cooled scooter.
Reference: 01061940
Powerful 50cc kit which is located between the AIRSAL luxury and the T6 but all this at a low price.
Reference: 030306
A kit without solid breech with performances worthy of the origin, arises with the original breech of PIAGGIO new models (with point towards the back, not with the square heads).
Reference: 31 8883
A truly surprising kit, both for its power and its reliability. The must of 50cc liquid kit.
Reference: KT00112
One of the best price / quality / strength, market performance for scooter Piaggio liquid.
Reference: 477539
A surprising kit, with excellent quality and finish that will allow you to gain power while being reliable.
Reference: 251507
A 50cc cylinder without cylinder head old liquid models very solid and inexpensive.
Reference: 324574
A surprising kit, with excellent quality and finish that will allow you to gain power while being reliable.This cylinder is ideal if you want to keep the original cylinder head. Attention PIAGGIO before 2006 (see breech).
Reference: 9916580
One of the best value for money / solidity, market performance for Piaggio liquid motor scooter.
Reference: 01062940
A slightly more powerful kit that originally intended primarily for roll every day.
Reference: 31 8865
A really surprising kit, so that by his power reliability. The must 50cc kit.
Reference: 31 8884
An ultra-efficient kit reserved for competition in 50cc, very worked diagrams with a very studied architecture!
Reference: 071600
A very robust and powerful kit for your PIAGGIO / GILERA ... 50cc scooters with liquid cooling.
A high quality 50cc complete cast iron motor of very high quality for PIAGGIO / GILERA motor scooter
