Reference: 31320
air filter foam ARTEIN for original air box RIEJU RS1
A simple filtration layer foam ideal to prepare your original air box.
Banner
The air filter MALOSSI E13 is a model that has been specifically designed for racing, tuning, mind racing ... It has a really neat look with its red foam and chrome cover impregnated with the lion.
This model angled 25 ° permits placing themselves differently and are smaller places that the right model. Expanded polyurethane foam allows perfect coupled with really good filtration breathing.
With its large volume it allows good air supply. You will certainly appreciate that the mounting base is rubber with LOGO MALOSSI. To offer the best performance possible, this filter comes with venturi improvement tulips, this improves the carburetor operation but also allow that there is no walk in the intake duct.
There are several models of filter E13 MALOSSI angled at 25 °, to select before purchase. 3 choices are available to you:
1- The Ø32 and Ø38mm model comes with a tulip, mounted without tulip is made for threaded carburetors or not has Ø37mm air filter attachment Ø39mm like PHBL mounted with the tulip is made for PHBG carburettors 15 a 21mm threaded in Ø32mm! This tulip improvement venturi is threaded.
2- The Ø42 Ø58,5mm model and comes with a soft tulip (picture posed on the red carburettor) mounted without tulip is made for carburetors or threaded connections or not Ø57,5 has 59,5mm, mounted the tulip is made for threaded carburetors or not Ø 41mm filter attachment Ø43mm has air! This improvement venturi tulip is not threaded.
3- The model Ø42, Ø50 and Ø58,5mm comes with two soft tulips (picture posed on the red carburettor) mounted without tulip is made for carburetors or threaded connections or not Ø57,5 has 59,5mm, mounted with the first tulip is made for threaded carburetors or not Ø 41mm filter attachment has a 43mm air! This improvement venturi tulip is not threaded. Mounted with the second Tulip is made for threaded carburetors or not Ø 49 to 51mm filter attachment has air! This improvement venturi tulip is not threaded.
AB | C | D | E | F |
Ø32 and 38mm | 25 ° | 10mm | 95mm | 94mm |
Ø42 and 58,5mm | 25 ° | 5mm | 95mm | 94mm |
Ø42, 50 and 58,5mm | 25 ° | 10mm | 95mm | 94mm |
Always remember that soft tulips are well back in the horn during assembly to fully absorb the march. You must oil the air filter with a suitable oil more after installation of a horn, review your settings are a main jet level.
Reference: 31320
A simple filtration layer foam ideal to prepare your original air box.
Reference: 115200
Air filter design nice black, to remain discreet on your 2 wheels.
Reference: 473482
A quality air filter for improved filtration.
Reference: 260269
TUN 'R air filter for SHA carburetor, it allows better filtration and better performance.
Reference: 1213257B
MALOSSI rubber tulip to improve the venturi effect.
Reference: 0 / 001.070.5000
Replacement air filter for your mécaboite 50cc RIEJU!
Reference: 0411452
Air filter MALOSSI Red Filter E14 excelent filter gives a maximum of area with quality filtration.
Reference: 1413963
A foam that can adapt to all air boxes with optimal air filtering.
Reference: 1381
TUN 'R air filter for carburettor, ideal for offering more performance to your engine equipped with a 15 or 16mm SHA!
Reference: 484132
Air filter foam teknix to cut, size 30X21cm.
Reference: 10001-82
A tulip which increases the venturi effect and therefore the efficiency of your engine.
Reference: 114225
A foam board 330 X 330mm, ideal for cutting, as you like the shape of your original air filter. Made in Italy!
Reference: 31305
A single layer of filtration foam ideal for preparing your original air box.
Reference: 343.0026
Ideal to fit your Ø60 or 62mm air filter on your POLINI CP carburettor.
Reference: 203.0011
A high-end air filter specially designed for the PEUGEOT 103 mvl, mv, lm and many more! To accompany a POLINI CP carburetor.
Reference: 343.0025
Ideal for adapting your Ø60mm air filter on your POLINI CP carburetor.